Brewolution Fittings and tubes Kit for Chiller 40 and 70. 2 x Fittings connector 3/8”, tap adaptor, tap connector and 2 x 1,5 m. tube is included.

Brewolution Chiller 8,8m in Stainless Steel with optimized distance between the spirals for faster cooling of the wort. Suitable for breweries, pots and kettles up to 40L. Fittings and hose not included.Diameter 25 cm.Height 37 cm.

Mix Prestige essences with unflavoured vodka or other spirit. Also works well with beer, cider etc. Fast and easy to mix.Content: 20mlDosage: 20ml essence to 750ml drinkDoes not contain alcohol.

Brew Pot 78 liters with valve adn thermometer in stainless steel with lid. Thick bottom that works with all types of hobs, induction included. Volume: 78 litres Inner height: 500 mmInner diameter: 445 mmMaterial: Stainless steel 201 (1mm thickness).Encapsulated bottom with 4 mm thick aluminum core.Nipple diameter: 12 mm NOTE! The bushing is welded. Also suitable for Bazooka Screen on the inside. Hose nipple included! 

Medium coloured malt with characteristic malty aroma. Rich flavours of bread and honey with notes of biscuit.Good for adding complexity and colour to most beer styles, and traditionally used at 100 % of the grain bill for traditional German dark lager styles.Munich I is the paler version of the Munich malts from Weyermann®. Slightly lower levels of enzymatic power than in paler base maltsWeyermann Munich Malt 250gkg CrushedGrain type: barleyColour: 12 - 18 °EBC (5 - 7 Lovibond)Content: 1kg crushed barley malt Grain type: barley

Brew Pot 32 liters with valve and thermometer in stainless steel with lid. Thick bottom that works with all types of hobs, induction included. Inner height: 340 mmInner diameter: 346 mmMaterial: Stainless steel 201 (1mm thickness).Encapsulated bottom with 4 mm thick aluminum core.Nipple diameter: 12 mm NOTE! The bushing is welded. Also suitable for Bazooka Screen on the inside. Hose nipple included! 

Mix Prestige essences with unflavoured vodka or other spirit. Also works well with beer, cider etc. Fast and easy to mix.Content: 50mlDosage: 50ml essence to 2x 750ml drinkDoes not contain alcohol.

Cleaning solution is ideal for cleaning all pH, ORP and TDS meter's probes. To help maintain high performance and accuracy for any electrode, regular cleaning is required to remove the build up of dirt and setiment on the glass or carbon surfaces of a sensing probe. Use M10016B to help extend the life of the meter's electrode. Electrode cleaning solution should not be a substitute for rinse and or storage solutions. Sachet packaging means that you get fresh solution every time. Ideal for infrequent or field use. No risk of using an expired calibration solution. Milwaukee cleaning solutions are designed to help you achieve reliable and repeatable measurements while extending the life of your electrode.DESIGN FEATURESFundamental for gently cleaning the electrode between uses and before storage.Sealed against light and air.Ideal for on-the-spot cleaning too.Simply open, insert the tester or electrode into the sachet and gently stir let soak for 15 minutes.

The Brew Cooler is a waterproof, insulated cooling bag to keep correct fermentation temperature in fermenters up to 30L. Perfect if you dont have space or possibility to place your fermenter in a temperature controlled refrigerator at home.How the Brew Cooler worksThe function is simple, place your fermenter inside the Brew Cooler and add frozen water bottles (preferrably plastic) inside the Brew Cooler to reduce and keep the correct fermentation temperature. The volume of frozen water in the plastic bottles determines how many degrees below room temperature the fermenter will be kept at. The frozen water bottles should preferrably be replaced every 24 hours, or when needed.1. Place the Brew Cooler at a suitable location in your home. Place your fermenter with wort inside the Brew Cooler.2. Place the correct number of frozen water bottles inside the Brew Cooler according to the Temperature Chart below.3. Close Brew Cooler zip locks.4. After 24 hours, exchange the frozen water bottles for new ones.Temperature Chart: Choose the correct fermentation temperatureThis chart gives examples of the number and size of frozen water bottles that is needed for a given temperature reduction in the Brew Cooler for 20L beer.One 1-liter bottle reduce 1,5°C.Two 1-liter bottles reduce 3°C.One 1,5-liter bottle reduce 2°C.Two 1,5-liter bottles reduce 4°C.Three 1,5-liter bottles reduce 6°CFour 1,5-liter bottles reduce 8°C.One 2-liter bottle reduce 3°C.Two 2-liter bottles reduce 6°C.Three 2-liters bottles reduce 9°C.Four 2-liter bottles reduce 12°C.These temperature reductions are valid for 20L beer in the fermenter. As can be seen, the temperature reduction is about 1,5°C per liter frozen water. The maximum temperature reduction that can be archieved is about 15°C.Example: If your home ambient temperature is 21°C and you want to ferment 20L ale at 18°C, add one 2-liter or two 1L) frozen plastic water bottle together with your fermenter in the Brew Cooler. Exchange every 24 hours and repeat at least the first 3-4 days during the primary fermentation. If your brew 10L then about half the volume, 1-1.5L frozen water, is enough. What is the correct fermentation temperature?To get your home brew to taste as good as possible its important to control the fermentation temperature. An ale can theoretically be fermented at room temperature, 20-22°C, however it will taste the cleanest when fermented around 18°C, at least the first 3-4 days of fermentation. Lagers should be fermented at 10-12°C. Saisons can be fermented at high temperatures, 20-35°C, depending on the flavour profile you want.Brew Cooler 30L specificationsHeight: 60 cmLength 40 cmWidth: 40 cmMaterial: Tough black polyester Kraftig svart polyester with insulation and a grey water proof inner liner.Carrying strap: The Brew Cooler is equipped with an adjustable carrying strap.

Original Pyrex Erlenmeyer flask with wide mouth and excellent thermal and chemical performance thanks to the Pyrex Borosilicate glass. Idal for yeast starters. Boil the wort, or malt extract and water, in the flask on a stove/hot plate. Cool in water bath and then add yeast. Close them flask mouth with aluminum foil or fermenter airlock.- Complies with DIN ISO 24450- Erlenmeyer pattern- Manufactured from Pyrex borosilicate glass- Excellent thermal performance- High resistance to chemical attack- White enamel graduations and marking spot- Graduated to capacity- Printed with Trace Code for downloadable batch certificate- Batch certificate available to download from www.scilabware.com- Made in Great BritainPyrex Wide-Neck Erlenmeyer Flask 500mlVolume: 500 mlDiameter: 105 mm (at the base)Height: 175 mmOpeing inner diameter: 46 mm

Muntons Carbonation Drops 160g