Accessories

Thermometer LCD 2-36 degrees Celcius. Self-adhesive. Perfect for the fermenter. Size: 21x148 mm.

White Thread Seal 15mm wide and 12 meters on the roll.

The Original. VWP can be used to clean and sanitize all types of home brewing equipment. 100g is enough for up to 110L. Needs to be rinsed off with water after use. Alternative to cleaners such as PBW.This sterliser comes in a sturdy tub and contains the steriliser in a white powder, its as simple as adding a level teaspoon to your primary fermentation bucket and filling it with some water, add all your equipment to the bucket and leave to sit in the solution for approx 15 minutes, rinse and that's it ready for use

A 'Wine/Beer Thief' is the ideal solution for sampling your beer/wine in a quick and easy way. You can even use it as a measuring cylinder! Made from crystal clear plastic giving you the possibility to evaluate the colour/ clarity and to read your hydrometer. Closes automatically, so no difficult finger exercises! 50 cm long for easy and automatic filling without the need of suction. Hydrometer is not included.

Wyeast Nutrient Blend 42g

Practical Zip-lock bag with zipper (zipper bag) in food-approved, clear and tear-resistant 60um Polyethylene plastic. Easy to open and close with the zipper, and no problems with opening and closing as with regular zip bags without a zipper. 100% Recycleable.Perfect for storing products, food, malt, hops, etc.Opening (with Zip-lock): 120 mmHeight: 170 mmSee image to the right for reference to Opening and Height.Products in the bag are for illustration only and is not included.

Practical Zip-lock bag with zipper (zipper bag) in food-approved, clear and tear-resistant 60um Polyethylene plastic. Easy to open and close with the zipper, and no problems with opening and closing as with regular zip bags without a zipper. 100% Recycleable.Perfect for storing products, food, malt, hops, etc.Opening (with Zip-lock): 160 mmHeight: 220 mmSee image to the right for reference to Opening and Height.Products in the bag are for illustration only and is not included.

Practical Zip-lock bag with zipper (zipper bag) in food-approved, clear and tear-resistant 60um Polyethylene plastic. Easy to open and close with the zipper, and no problems with opening and closing as with regular zip bags without a zipper. 100% Recycleable.Perfect for storing products, food, malt, hops, etc.Opening (with Zip-lock): 225 mmHeight: 310 mmSee image to the right for reference to Opening and Height.Products in the bag are for illustration only and not included.

Better Brew MK4 Filter Pads 2-pack. Medium 500 Grade for red wines requiring a robust mouth feel, fits the Better Brew MK4 Wine Housing. Rinse pads and soak for 5 minutes before use.Filter Pads available include:- 2000 - Beer - Allows just a small amount of yeast through for secondary fermentation & carbonisation.- 1000 - Course - Removes most debris.- 500 - Medium - Red wines requiring a robust mouth feel.- 100 - Fine - White wines and Roses.- 000 - Sterile - Removes even the yeast leaving a sterile brew.Read moreClick here

Brewly AC-211 Digital Universal Thermostat. EU-version power cord (UK power cord not included). Can control one Heating source and one Cooling source. Sensor included.

Brewly Chiller 13m in Stainless Steel with optimized distance between the spirals for faster cooling of the wort. Includes Quick Connectors (3/4-inch) that are Gardena system-compatible (as in image). Suitable for breweries, pots and kettles up to 70L. Cooling Spiral length: 13 metersSpiral diameter: ca 25 cmSpiral height: ca 35 cmTotal height: ca 52 cm

Brewly Chiller 8,8m in Stainless Steel with optimized distance between the spirals for faster cooling of the wort. Includes Quick Connectors (3/4-inch) that are Gardena system-compatible.Suitable for breweries, pots and kettles up to 40L.Spiral diameter: ca 25 cmSpiral height: ca 25 cmTotal height: ca 39 cmCooling spiral length: 8,8 meters.

Refractometer with Automatic Temperature Correction (ATC) and dual scales: 0-32°Brix and up to SG 1.130.

Brewster Hop Spider with fine stainless steel mesh to keep hops separated from the wort during the boil.InfoMaterial: 304 stainless steelMesh size: 310 micronsTotal height: 38 cmCylinder height: 36 cmDiameter opening: 15 cmDiameter bottom: 10 cm

Coobra Mash Paddle in 304 Stainless Steel. 60cm in length.

A 'Wine/Beer Thief' is the ideal solution for sampling your beer/wine in a quick and easy way. You can even use it as a measuring cylinder! Made from crystal clear plastic giving you the possibility to evaluate the colour/ clarity and to read your hydrometer. Closes automatically, so no difficult finger exercises! 50 cm long for easy and automatic filling without the need of suction. Hydrometer is not included.Weight 0.08 kgLength 58.2 cmHeight 3.5 cmWidth 10.2 cm

This is a simple, reliable and efficient magnetic stirrer for up to 5L flasks. Excellent speed precision. Remains cold even after several days of continuous use. Ensures a high resistance to chemical agents. - High Reliability- Control panel is shielded from liquid spills- Epoxy-coated tough steel casing- Long life operation- Accepts up to 5 liter flasksFeatures- Pale surface for visualization of particles and color changes- Remains cold, even after days of continuous use- Specifically designed for microtitration- Excellent speed control, even at low speed- Simple & Practical- Precision speed regulation up to 1100rpm- Universal mains voltage / frequency range- Light weightTechnical data: Fisher Scientific Microstirrer Magnetic StirrerHeight: 48mmWeight: 0.55KgSpeed: up to 1100RPMMaterial: Epoxy, MetalSpeed Control: Excellent speed control even at low revolutionsSize: 48 H x 120 W x 128 DmmWattage: 0.6WWidth: 120mmVoltage: 100-240VHertz: 50/60HzElectrical Requirements: 100 to 240V, 50/60Hz, 0.6W

Five Star pH 5.2 Stabilizer 113g

Whirlpooling and aerating is good practice before you pump the wort out of your brewing system. It infuses oxygen which promotes enhanced yeast activity and places the hops and protein back into suspension before the filtering process. The Grainfather Whirlpool and Aeration Brewing Paddle provides an excellent whirlpool by allowing the perfect amount of liquids and solids to pass through its large blades. Just simply attach to a standard electric power drill via its ‘chuck bit’ styled end for relaxed aeration of your wort. Grainfather Whirlpool and Aeration Paddle:- 304 stainless steel, 8mm (1/3”) drill bit end and 12.5 cm (5”) wide blades- Designed to be easily attached to a power drill via an 8mm (1/3”) drill bit style end- Plugged at the end- 56cm (22”) long, perfect for use in large boilers and smaller stove top kettles- 12.5cm (5”) wide blades to create a strong aeration and whirlpool

Brand new Hop Sock design, suited for dry hopping or steeping hops in the boil. If you have a Heat Exchanger, we would highly recommend bagging your hops if you're going to do a NEIPA or DIPA, as it may clog your plates or even your pump! Rated up to 110C it is the perfect tool for an easier clean up regime. This can also be used to steep malted grain, or literally anything you need to use like a tea bag. Re-usable, we recommend soaking in a Sodium Percarbonate mixture then a machine wash. Customise your hop sock with this "Tie The Knot" Hop Sock, cut it in half, thirds, fourths. Then simply tie the end, bag up your hops/spices tie again and drop them into your boiler, fermenter or even a modified radler. This can also be used to steep malted grain, or literally anything you need to use like a tea bag. Dimensions:150mm wide800 mm long (we recommend cutting in half and tying each end like a sack, or use as long tube) Tip and tricks, tie hops with double the amount of space like a half empty sack (expansion/absorption). Then tie unscented floss to the end and hang with a clip/clamp in your boiler/kettle or fermenter. Keeps it from touching the bottom and clogging ball valves or pumps.

Brand new Hop Sock design with far stronger stitching all the way around. Suited for dry hopping or steeping grain or spices in the boil. If you have a Heat Exchanger, we would highly recommend bagging your hops if you're going to do a NEIPA or DIPA, as it may clog your plates or even your pump! Rated up to 110C it is the perfect tool for an easier clean up regime. This can also be used to steep malted grain, or literally anything you need to use like a tea bag.  Dimensions:130 x 580 mm

Hop Spider with fine stainless steel mesh to keep hops separated from the wort during the boil.InfoMaterial: 304 stainless steelMesh size: 300 micronsTotal length: 46cmLength of mesh basket: 35cmDiameter top: 15cmDiameter bottom: 10cm

Jonas Juice Strainer Bag with polyester weave.

Top-shelf polyester brew in a bag (BIAB) featuring 65-micron mesh with 1-inch reinforced Webbing.  70cm x 85cm. BIAB - top-shelf polyester brew in a bag (BIAB) featuring 65-micron mesh with 1-inch reinforced Webbing.  The bags are 70cm x 85cm making them large enough to use in even pots that are 60 litres and over! Suitable for boiling as well up to 110C.

This 10 cm handy spring clamp has been the tool of choice for many KegLand employees to hold the malt pipe silicone hose in place during the mash. This clamp features a heavy-duty muslin spring which ensures your silicone hose never accidentally pops out of your mash tun and spills your prescious nectar over your brewery floor. It features rounded handles for a comfortable grip and a PE end grip to ensure your hosing is kept secure. This clamp is made from PP and PE which have good chemical resistance so it will stand up to the task for use around common brewing cleaners and sanitisers. These spring clamps have a multitude of potential uses throughout your brewing outside of securing silicone hosing.

Heavy duty brewing gloves, ideal for cleaning around the brewery or even the home. Seriously long for getting those arms deep into Kegmenters, Fermentasaurus' and those Large and In Charge Brew Pots. Heavy Duty Vulcanized Latex Brewing Gloves - 55cm LongThese heavy duty brewing gloves are made from vulcanized latex, ideal for cleaning around the brewery or even the home. Seriously long for getting those arms deep into Kegmenters, Fermentasaurus' and those Large and In Charge Brew Pots.Tough chemical resistant material provides good protection to your hands during clean-up and sanitary handling of equipment.  55cm long so will also protect the forearm when reaching into harsh cleaning chemicals.

The KegLandHeat Resistant Gloves / HIZO Oven Mitts are as impressive as they are functional with the ability to handle contact with temperatures of up to 500° Celsius (932°F). NON SLIP. This means that it is perfect for use with oven baking, hot pots, grilling, barbecuing, and woodstoves. Fashioned with high-quality aramid fibers which work to insulate and protect hands from burning temperatures, these gloves have a comfortable cotton and polyester lining which allows for breathability to resist sweating and a gauntlet-length style of design to protect wrists and forearm from scorching heat as well. These gloves are thick to provide excellent thermal protection and durability, but they are lightweight for extended use without fatigue. Sizing: Medium - sorry sausage finger friends :( hopefully a Large and XL to come soon. With heat resistance up to 932F (500C°), these gloves are perfect for: Perfect for oven baking, hot pots, grilling, barbecuing, and woodstoves.Adjusting logs in the fireplaceTouching scorching hot utensils or food while boiling or fryingChanging light bulbsHigh-quality aramid fibers for insulation and cotton and polyester liningDesigned for mobility and flexibility in mindFood-grade silicone layerMachine-washable, and can be easily hung on the line to dry.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 105x148 mm (each label)- 4 labels per A4 sheet- Total 100 pcs A4 sheets- Total 400 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 105x57 mm (each label)- 10 labels per A4 sheet- Total 100 pcs A4 sheet- Total 1000 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Round corners.Specification- 38,1x21,2 mm (each label)- 65 labels per A4 sheet- Total 100 pcs A4 sheet- Total 6500 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Pot 12L with lid&scale

Protafloc is a clarifying agent based on Carragenan (the active sunstance in Irish Moss). Dosage 2-3g per 100L. Add 15 minutes before end of boil.Weight: 40g

Star San is a high foam, final acid anionic rinse for sanitizing equipment. It contains a blend of phosphoric acid and dodecylbenzenesulfonic acid. This synergistic blend is unaffected by excessive organic soils.Star San is also a self-foaming acid anionic detergent. It can be applied through a foamer to produce self-adhering foam or manual application. Cleaning with Star San on a daily basis will leave equipment in an acid condition that will eliminate water spotting, mineral build-up, and corrosion. Dosage: 15 ml per 10 liters of water.Contact time: 3 minutes.

Star San is a high foam, final acid anionic rinse for sanitizing equipment. It contains a blend of phosphoric acid and dodecylbenzenesulfonic acid. This synergistic blend is unaffected by excessive organic soils.Star San is also a self-foaming acid anionic detergent. It can be applied through a foamer to produce self-adhering foam or manual application. Cleaning with Star San on a daily basis will leave equipment in an acid condition that will eliminate water spotting, mineral build-up, and corrosion. Dosage: 15 ml per 10 liters of water.Contact time: 3 minutes.

Star San is a high foam, final acid anionic rinse for sanitizing equipment. It contains a blend of phosphoric acid and dodecylbenzenesulfonic acid. This synergistic blend is unaffected by excessive organic soils.Star San is also a self-foaming acid anionic detergent. It can be applied through a foamer to produce self-adhering foam or manual application. Cleaning with Star San on a daily basis will leave equipment in an acid condition that will eliminate water spotting, mineral build-up, and corrosion. Dosage: 15 ml per 10 liters of water.Contact time: 3 minutes.

Star San is a high foam, final acid anionic rinse for sanitizing equipment. It contains a blend of phosphoric acid and dodecylbenzenesulfonic acid. This synergistic blend is unaffected by excessive organic soils.Star San is also a self-foaming acid anionic detergent. It can be applied through a foamer to produce self-adhering foam or manual application. Cleaning with Star San on a daily basis will leave equipment in an acid condition that will eliminate water spotting, mineral build-up, and corrosion. Dosage: 15 ml per 10 liters of water.Contact time: 3 minutes.