Brewery Accessories

Powerful and quiet 45L/min 65W magnetic pump capable of handling water/wort up to 140°C. Perfect for recirculating wort or drinking water. Stainless Steel Head.Do not run the pump dry.Specifications Magnetic Pump MP-40RM Stainless Steel HeadCapacity: max 45 L/min (60Hz)Head: max 4,6 meters (60Hz)Power rating: 65WConnections: 1/2" NPT threaded males on both input and output (NPT/FPT)Voltage: 220-240V (50-60Hz)Protection: Class BPower cable: C13-plug (EU-version power cord (UK power cord NOT included))Note: Do not run the pump dry

Mash Grid 255mm

Plastic Head for Magnetic Pump MP-15RM (spare part).

Powerful and quiet 10L/min magnetic pump capable of handling water/wort up to 90°C. Perfect for recirculating wort or drinking water.Do not run the pump dry.SpecificationsCapacity: max 10 L/min (60Hz)Head: max 6 meters (60Hz)Power rating: 18WConnections: 1/2" BSP threaded males on both input and output. Includes 1/2" barbs for hoses with ca 12mm inner diameter.Voltage: 12V DC (50-60Hz)Protection: Class BNote: Do not run the pump dry

Stainless Steel Mash Paddle 61cm

Stainless steel tap, mainly for kettles. Rubber-covered handle with auto-lock function. Made of 304 stainless steel. Outlet:  1/2" Female ThreadInlet: 1/2" Male Thread with 1/2" nut and silicone gaskets Fits 7/8" (23-23mm) hole in the pot.

Stainless steel tap, mainly for kettles. Rubber-covered handle with auto-lock function. Made of 304 stainless steel. Outlet:  3/8" barb (10mm) & 1/2’’ NPT ThreadInlet: 1/2" with 1/2" nut and silicone gaskets Fits 7/8" (23-23mm) hole in the pot.

Stainless steel tap, mainly for kettles. Rubber-covered handle with auto-lock function. Made of 304 stainless steel. Outlet:  3/8" barb & 1/2" Male  ThreadInlet: 1/2" Female and 1/2" Male Thread and silicone gaskets Fits 7/8" (23-23mm) hole in the pot.

The Brew Kit 25L is the perfect complement to your automatic brewery - we've put together the things you need to start brewing. Just add bottles and Recipe Kits (ingredients).Brew Kit 25L contains:- 25-liter (30L max) fermenter with med tap och lid- 25-liter (30L max) fermenter with lid (no tap)- Fermenter air lock- Bottle filler (fits the fermenter tap)- Automatic pump siphon 44cm (Note: without holder and clamp)- Bench Capper Better Brew- Mash Paddle 52cm- Thermometer- Bottle Washer Spin Mini- SanitizerNote: Does not contain bottles or ingredients.

Brew Grease is a food‑grade lubricant used to coat O-rings and gaskets in your brewing setup. It is NSF‑H1 certified for incidental contact with food and drink. It ensures that connections remain tight and leak-free — crucial for a successful brewing process. You’re at your brew stand, tools laid out, yeast bubbling away in your fermenter and you know how every snug connection matters. Even the smallest O‑ring or seal, if dried, cracked or unlubricated, can create a leak that wastes wort or sends pressure escaping. That’s why Brew Grease becomes part of your ritual, an unsung hero that quietly makes sure your fittings stay tight, seals stay soft, and your brew day stays on track. Benefits of Beer GreaseHigh Quality: Food-safe and approved for use in brewing systems.Extends Lifespan: Helps reduce friction and wear, prolonging the life of O-rings and seals.Tight Sealing: Keeps your connections leak-free and secure.Easy to Apply: Smooth and easy to use on seals and O-rings for optimal performance.Versatile Use: Suitable for various types of seals and fittings in your brewing system. A Unsung Brew Hero You’re at your brew stand, tools laid out, yeast bubbling away in your fermenter and you know how every snug connection matters. Even the smallest O‑ring or seal, if dried, cracked or unlubricated, can create a leak that wastes wort or sends pressure escaping. That’s why Brew Grease becomes part of your ritual - an unsung hero that quietly makes sure your fittings stay tight, seals stay soft, and your brew day stays on track. How to ApplyClean all connections and dry thoroughly.Gently rub a small amount of Brew Grease around each O‑ring, gasket or fitting. Think of it as seasoning your rubber parts, not flooding them.Assemble your system carefully; seals should seat easily - not stretch or slip.Reapply before extended brew sessions, or when disassembling for cleaning or storage.

Graduated 15-60L volume tube in polycarbonate that fits the Brewly 70L V1 brewer. Brewly 70L V1 Volume Sight Tube (15-60L)

Heat insulation for the Brewly 70L V3 brewery. Provides faster heating, more vigorous boil and reduces energy consumption. Material: 5 mm neoprene foam.

Heat insulation for the Brewly 70L V3 brewery. Provides faster heating, more vigorous boil and reduces energy consumption. Material: 5 mm neoprene foam.

Brewly Flexible Recirculating Arm 40-70L. Spare Part.

Glass cap that fits both 40L and 70L Brewly breweries.

Brewly Handle for Malt Basket 40L & 70L Stainless steel.

The Brewly Hop Spider keeps hops together during the boil, separated from the wort. It can be used on most breweries and kettles. This spider can be used for any kind of hops, including hop pellets.Brewly SS500 Hop SpiderDiameter: 15 cm Height: 35,5 cm Material: 500 micron 304 grade stainless steel mesh, with stainless steel support band and single hook

The Brewly Hop Spider keeps hops together during the boil, separated from the wort. It can be used on most breweries and kettles. This spider can be used for any kind of hops, including hop pellets.Brewly SS800 Hop SpiderDiameter: 15 cm Height: 35,5 cm Material: 800 micron 304 grade stainless steel mesh, with stainless steel support band and single hook

Heavy duty stainless steel mash paddle from Brewly. Length 60cm.

Tap made in 304 stainless steel that fits most breweries. Rubber covered handle with auto-lock function. 1/2" thread with stainless 1/2" nut and silicone seal. 13mm (1/2") barb at the opening (fits 1/2" hose).

Spare part. Brewly Telescopic Malt Basket Tube 40L.

Stainless Whirlpool Arm with CAM-lock connector, makes it possible to create a whirlpool in the wort after the boil which increases volume efficiency and speeds up the cooling of the wort. Black neoprene handle.Brewly Whirlpool Arm CAM-lockLength: 40cm, usefull length 35cm.Material: Stainless Steel 304.

Stainless steel bottom filter for Brewster Beacon 40 and 70-liter. Brewolution has developed a completely new "false bottom" that connects directly to the inlet to the pump instead of lying loose over the entire bottom. Instructions can be found here!

Whirlpool arm for Brewster 40L that fits onto the existing recirculation pipe. It recirculates the wort and thereby making a whirlpool at the bottom of the kettle.Length 35,5 cm.

Brewolution Pump hose Beacon 40L. Silicone. Spare part.

Brewolution Sight Glass Plug for Brewster Beacon. Spare part.Level Gauge Plug for Brewster Beacon. Placed at the top of the Level Gauge.

Brewster Hop Spider with fine stainless steel mesh to keep hops separated from the wort during the boil.InfoMaterial: 304 stainless steelMesh size: 310 micronsTotal height: 38 cmCylinder height: 36 cmDiameter opening: 15 cmDiameter bottom: 10 cm

Neoprene Jackets with recirculation arm cover for stable temperatures and heat retention. 8 mm thick neoprene. Must-buy if you brew where it is cold/windy.

Complete silicone tube kit for connecting the tubes and pump at the bottom. SPARE PARTS

Neoprene Jackets with recirculation arm cover for stable temperatures and heat retention. 8 mm thick neoprene. Must-buy if you brew where it is cold/windy.

Spare part: Roller (crush roller) to Bulldog Malt Mill. 1pcs (2pcs are needed)

Bulldog Mash Paddle in 304 Stainless Steel. 61cm in length.

Coobra Mash Paddle in 304 Stainless Steel. 60cm in length.

Hop Spider with fine stainless steel mesh to keep hops separated from the wort during the boil.InfoMaterial: 304 stainless steelMesh size: 300 micronsTotal length: 46cmLength of mesh basket: 35cmDiameter top: 15cmDiameter bottom: 10cm

Upgrade your 65L BrewZilla Gen 4 with the all new barbed magnetic driven pump. This pump comes standard with the 100L BrewZilla Gen 4. This model was once a Green Demon (Green Colour), it has now been switched over to a Grey Goblin (Gun Metal Grey Colour). To upgrade the 65L BrewZilla Gen 4, you will need to perform some light electrical terminal rewiring. This pump comes prefitted with blade and circle connectors to swap out the standard 6 watt pump. You will need to re-use the grommet fitting so be gentle when taking it off the 6w pump. Please see product photos for particular configurations, standard config using ball valve, or Oli's Hail Mary configuration (braided hosing sold separately). Standard Configuration - No additional fittings/hoses requiredThis configuration is a direct swap out of the 6w pump to the 25w pump. Utilising the tee splitter and the original hosing that comes with the 65L Gen 4 BrewZilla.It does help a little bit if you use the outlet elbow piece on the inlet, and vice versa as the 25w pump is slightly taller than the 6w stock standard pump. Alternative Configuration ~ Oli's Hail MaryFor this method you will need about a 165mm piece of 12mm ID hosing, preferably braided. You cannot use normal silicone hosing for this. This method does not use the tee piece of ball valve. It solely relies on the bigger 25w pump to do all of the transferring/recirculating needs.Please see product photos for configuration types. This pump can also be used around your brewery, but you will need an electrician to fit a 10a plug to it. Capable of withstanding temperatures up to 120C it can handle the boil directly without the need to cool before use. Extremely efficient 1.1amp pump which can be run continuously at elevated temperatures.  Specifications:Voltage: 220-240 at 50-60hzMax Head: 3.4mMax Flow: 19L/minWiring: Fork and Ring Connectors fitted with insulation sheath.Fittings: 13mm Male BarbNOTE: Like almost all centrifugal pumps, do not run this pump dry.