Accessories

Can Carrier for 4 cans 10-pack. Can carriers are the solution to pack your cans. Easy to handle, eco-friendly and efficient! Pack your cans by four!

Can Carrier for 6 cans 10-pack. Can carriers are the solution to pack your cans. Easy to handle, eco-friendly and efficient! Pack your cans by six!

Brewly ACS Can Adaptors 3-pack 330ml Standard, 440ml Standard & 330ml Sleek. Work with all Brewly ACS canning machines.

Brewly ACS Can Adaptor 250ml Sleek. Adaptor for using the Brewly ACS Can Sealer with 250ml Sleek cans.PLEASE NOTE: This adaptor does NOT fit the 250ml SLIM can, only 250ml SLEEK. The SLEEK can is 115mm high and 58mm diameter while the 250ml SLIM is 135mm high and 50mm diameter.

Brewly ACS Can Adaptor 250ml SLIM. Adaptor for using the Brewly ACS Can Sealer with 250ml SLIM cans. Fits SLIM cans with measurements ca 50mm diameter and 135mm height.PLEASE NOTE: This adaptor does NOT fit the 250ml SLEEK can, only 250ml SLIM. The SLEEK can is 115mm high and 58mm diameter while the 250ml SLIM is 135mm high and 50mm diameter.

Brewly ACS Can Adaptor 330ml Sleek. Adaptor for using the Brewly ACS Can Sealer with 330ml Sleek cans.

Brewly ACS Can Adaptor 330ml Standard. Adaptor for using the Brewly ACS Can Sealer with 330ml Standard cans.

Brewly ACS Can Adaptor 440ml Standard. Adaptor for using the Brewly ACS Can Sealer with 440ml Standard cans.

Spare part. Brewly ACS Can Adaptor 500ml Standard. Adaptor for using the Brewly ACS Can Sealer with 500ml Standard cans. This is the main adaptor that fits directly on the turntable.

Brewly Turntable Nut Tool. Steel.

This splash guard is made from strong polycarbonate and 304 grade stainless bolts.  It comes flat packed and can easily be assembled with an allen key.

This chuck is the chuck that is sold as a separate part so that the Cannular Bench Top Canning Machine (as well as the Semi-Auto Pro version) can be used with Visy/CDLE ends (202 CDL). No need to change over the rolls just switch over the chuck, make some fine adjustments to the rolls and table height and you can be seaming CDLE ends in no time at all. Most aluminium can bodies are made the same and are made to the same 202 standard. With that said two major competing manufacturers in the world make the lids for these 202 cans. The B64 is the standard lid that we sell in most of the cans you can purchase here in the 500ml variety or here in the 330ml variety. Both these 202 can designs will also fit other CDLE ends if you wanted to use your own CDLE ends for some reason.Two Major Competitors ExplainedIn the world of canning two major competitors exist that have developed the lids for aluminium beverage cans. These are "Ardagh Group" (a European Based Company) that mostly supply the CDL type ends and "Ball" (an American Based Company) that mostly supplies the B64 and a few other end types. Between the CDL and B64 ends these are the two dominant end types for 202 can bodies. Naturally in America we mainly see the B64 ends being used and in Europe we see more CDL ends being used.CDLE Ends ExplainedCDLE ends are the main end type sold by VISY as Visy licence this technology from Ardah Group. Some people loosely refer to the CDLE end as a CDL end but the technical name for this particular type of end is CDLE not CDL. This is not to be confused with the CDLE's predecessor which was CDL+.Specification:Made from hardened stainless steelMachined to 20 micron toleranceFits to 19mm drive shaftTighten using 3mm allen key

This add on table spacer has been designed to work with our Cannular Can Seamer (NOT for Semi-Auto Pro). As you would know the Can Seamer has been designed to work with the 500ml cans right out of the box however for smaller cans such as the 330ml and 375ml cans this type of spacer is required to lift the can up a bit higher.This particular table spacer has been designed to work with the KegLand 330ml Cans (KL13093) but it can also work with various other brands of cans from 330ml - 375ml.

This add on table spacer has been designed to work with our Cannular Can Seamer (NOT for Semi-Auto Pro). As you would know the Can Seamer has been designed to work with the 500ml cans right out of the box however for cans such as the 44cl cans this type of spacer is required to lift the can up a bit higher.

Brewly ACS-1 Turntable Ball Bearing - Spare part

Brewly ACS-1 Turntable Ball Bearing - Spare part

Fill any beverage into any bottle, can, jar or glass automatically with this internet connected, RAPT enabled, Cannular Can and Bottle Filler. More sanitary and easier to use than other competitors.This Cannular Can and Bottle filler is ideally used for bottle cans or even glasses.  Using two adjustable stainless steel tubes it will use one to purge oxygen out of the vessel and then use the second one to fill the vessel to a precise level based on an internal pressure sensor.  OLED Digital DisplayThe OLED display makes calibration super easy.  It also enables you to keep track of filling speed, number of cycles/fills, purge time, fill height and also enables you to make on-the-fly adjustments to your filling requirements so you can conveniently tweak the settings while filling. Integrated Ball Lock ConnectorsThe integrated ball lock connectors allow you to quickly attach your beer and gas ball lock disconnects.  We recommend the use of the Duotight Ball Lock Disconnects in Gas and Liquid to connected to these input and outputs. Integrated Pinch ValveThe integrated pinch valve is one of the things that makes this unit far superior to other filling machines.  The pinch valve enables you to easily remove the beer line for cleaning so the stainless tube, silicone hose and yellow carbonation cap/ball lock disconnect removes completely and can be put into the dishwasher or cleaned in the sink.  The pinch valve is mechanically simple and therefore reliable.  It is not subject to small particles like hops getting stuck in the device and eliminates the need for pre-filtration.  It pinches down on the silicone tube to shut off the flow.  This design also enables laminar flow that reduces fobbing.  The pinch valve improves reliability, makes it easier to operate and a piece of cake to clean. Integrated RegulatorOther filling machines require an external regulator that may need to drop the pressure lower than your normal keg dispense pressure.  Unlike these other fillers this filler has an integrated regulator which saves time and setup cost. This integrated regulator means you will not damage your machine by accidentally connecting it to a high pressure gas source.  You can hook up your gas line without the need for another external regulator or to fool around with your gas supply at all.  Just set the integrated regulator once during setup and forget about it. Multi-PurposeThe long stainless tubes and adjustable height make this device useful for pretty much any bottles up to 30cm heigh or cans up to 27cm heigh.  It can also be used for still or carbonated beverages.  So this device is useful for wine bottles, beer cans, champagne, crown seal bottles and pretty much any other bottle/can/vessel that has a neck opening greater than 15mm.  It can also be used for filling glasses, jars or other vessels. Fill ProfilesSome other machines require a full calibration to change from one vessel type to another.  This machine allows you to pre-save fill profiles depending on what you are doing.  Save a filling profile for your 300ml Cans and then save a different filling profile for your 750ml wine bottles.  Use our pre-saved presets or alternatively make your own fill profiles with different purge time and fill height.  These are also synced with the RAPT.io portal so you can save profiles and share them with friends or deploy to several other devices. RAPT.io Connected (via Wifi)As well as all the features above this filler connects to your Wifi and keeps track of your Cans Per Minute (CPM), fill speed and even temperature (if you purchase the external probe separately).  It will log all usage information so you can keep track of how your machine is running or even keep track of you staff to make sure they are cycling the machine at an acceptable rate.  The connectivity to the RAPT.io portal will enable you to more easily change settings, update profiles and keep track of your fill days so you can historically keep track of how your fill day went and which day you processed each batch.  Low DO PickupThe quality and longevity of your beverage is often defined by how well you keep oxygen off your product.  This filler purges the oxygen out of the can and will enable you to get substantially lower dissolved oxygen. Wall Mounted DesignThis type of can and bottle filler has primarily been designed for wall mounting configuration.  This allows you to bring a can or bottle up to the filler from the underside of the unit.  To wall mount this unit you can download and print this template.