Serving

The Home Brewery Restrictor Tubing Kit includes everything from ball-lock fitting to faucet. The thin tubing (1m long) provides a significant pressure drop that allows dispensing heavily carbonated beer without too much foaming.Comes fully assembled. The color and appearance of the tubing may vary. Keg is not included.

The Home Brewery Restrictor Tubing Kit includes everything from ball-lock fitting to faucet. The thin tubing (2m long) provides a significant pressure drop that allows dispensing heavily carbonated beer without too much foaming.Comes fully assembled. The color and appearance of the tubing may vary. Keg is not included.

This kit includes everything from ball-lock fitting to faucet. The thin tubing (1m long) provides a significant pressure drop that allows dispensing heavily carbonated beer without too much foaming.Comes fully assembled. The color and appearance of the tubing may vary. Keg is not included.

This kit includes everything from ball-lock fitting to faucet. The thin tubing (1m long) provides a significant pressure drop that allows dispensing heavily carbonated beer without too much foaming.2 meters.Comes fully assembled. The color and appearance of the tubing may vary. Keg is not included.

This updated kit includes everything from ball-lock fitting to faucet.The thin tubing (3.2 mm inside diameter) provides a significant pressure drop that allows dispensing heavily carbonated beer without too much foaming.In this kit, the thin tubing goes all the way from ball lock disconnect to Picnic Faucet, without the need to add short bits of 3/8" tubing to fit the faucet.The package includes:1x Threaded ball lock disconnect - 1/4" MFL - liquid1x John Guest 3/8" - 1/4" FFL 1x John Guest 3/16" - 3/8" stemabout 2 meters PE tubing 3/16"1x John Guest 1/4’’ - 3/16"1x Picnic Faucet with 1/4" stemComes fully assembled. The color of the tubing may vary.

iTap for 26mm crown bottles is the chameleon of the beer taps where you either fill your glass with fresh beer or counter-pressure fill your bottles safely without any issues.This model comes with a clamp lock for 26mm crown bottles. (Longneck, etc.). 3/8" barbs for liquid, gas and drain.The counter pressure bottling method eliminates any contact between the beer and oxygen. As a result, your brew stays fresh and carbonated.- Easy & clean bottling: install the bottle, fill it, remove the bottle. No mess, no foam, no fuss.- Fast filling: you can fill and cap (the capping devices are not included) 50-60 bottles in 1 hour.- The quality/price ratio is impressive: you get a durable device with a 5-year warranty. It fits for both commercial breweries and homebrewers as well.- Minimal drainage losses (only 1%), no foaming.- Quick installation: even if you see an iTap for the first time, you can install it on your own in under 10 minutes. Easy use: CO2 filling with a button, fast filling.- No cartridges or disposable parts.- The drinks bottled with iTap stays fresh and remains its initial flavor up to 90-120 days.- You can bottle any foamy drinks, including beer, cider, soda, etc.

iTap2X is the chameleon of the beer taps where you either fill your glass with fresh beer or countertryweights a bottle safe without problems and with iTap2X you can also hook up two different beers at the same time. This model comes with clamping locks for crown bottles. (Longneck, etc.). 3/8" barbs for liquid, gas and drain.Allows dispensing 2 types of drink at the same timeMinimal drainage losses (1-2%)Fast and no-foam bottles fillingLowers the equipment costsExpands the sales when space is limited Produced from high-quality food-grade materialsHigh safety levelHas no disposable removable partsEasy and convenient useWarranty serviceBest ratio of price vs quality

iTap X for 28mm PET bottles is the chameleon of the beer taps where you either fill your glass with fresh beer or fill your bottles safely with counter pressure without any issues. This model comes with a clamp lock for 28mm PET bottles. 3/8" barbs for liquid, gas and drain.The counter pressure bottling method eliminates any contact between the beer and oxygen. As a result, your brew stays fresh and carbonated.- Easy & clean bottling: install the bottle, fill it, remove the bottle. No mess, no foam, no fuss.- Fast filling: you can fill and cap (the capping devices are not included) 50-60 bottles in 1 hour.- The quality/price ratio is impressive: you get a durable device with a 5-year warranty. It fits for both commercial breweries and homebrewers as well.- Minimal drainage losses (only 1%), no foaming.- Quick installation: even if you see an iTap for the first time, you can install it on your own in under 10 minutes. Easy use: CO2 filling with a button, fast filling.- No cartridges or disposable parts.- The drinks bottled with iTap stays fresh and remains its initial flavor up to 90-120 days.- You can bottle any foamy drinks, including beer, cider, soda, etc.

iTap2X for 28mm PET bottles is the chameleon of the beer taps where you either fill your glass with fresh beer or a PET bottle safely without problems. And with iTap2X you can also hook up two different beers at the same time. This model comes with clamping locks for 28mm PET bottles. 3/8" barbs for liquid, gas and drain. Allows dispensing 2 types of drink at the same timeMinimal drainage losses (1-2%)Fast and no-foam bottles fillingLowers the equipment costsExpands the sales when space is limited Produced from high-quality food-grade materialsHigh safety levelHas no disposable removable partsEasy and convenient useBest ratio of price vs quality

Connection kit for iTap for carbonation and bottling if you already have iTap, keg for ball couplings, regulator with 3/8" female and sodastream carbonation cartridge. Contains all couplings, adapters and tubing needed (tube comes in a full length that can be cut to suitable lengths ). Includes a PET adapter with quick connection so you can easily connect and disconnect the gas.See picture for connection and installation instructions.NOTE! Does not include iTap, keg for ball lock, regulator with 3/8" female or sodastream carbonation cartridge.

Complete kit for carbonation and bottling from 18L Cornelius keg with ball connection to iTap X. Contains everything in the picture, iTap X counter pressure filler for crown bottles, 18L Cornelius keg (used), Regulator & Carbonation cartridge for soda stream as well as all connections, adapters and hose (hose comes in a full length that can be cut in suitable lengths). Includes a PET adapter with quick connection so you can easily connect and disconnect the gas.See picture for connection and installation instructions.

Complete kit for carbonation and bottling from 18L Cornelius keg with ball connection to iTap X. Contains everything in the picture, iTap X counter pressure filler for crown bottles, 18L Cornelius keg (used), Regulator & Carbonation cartridge for soda stream as well as all connections, adapters and hose (hose comes in a full length that can be cut in suitable lengths). Includes a PET adapter with quick connection so you can easily connect and disconnect the gas.See picture for connection and installation instructions.

G-connector with a compensator to pour the drinks through a defoamer to a mug, connects to iTap or iTap 2 (and all X models).

G-connector with a compensator to pour the drinks through a defoamer to a mug, connects to iTap or iTap 2.

iTap PRO is the perfect "all-in-one" solution for homebrewers have to bottle higher volumes or Microbreweries. Fills any glass bottles and growlersFits for bottles with various height and bottleneckCounter pressure method keeps the beer taste and carbonation for up to 90-120 daysProtection from bottles explosionMax capacity 180 bottles per hour1 year warranty serviceEvery device has a passport with serial number

The handle adaptor is installed instead of an original iTap handle, then a customised handle is installed on it.

A simple plastic tap that attaches directly to the beer line. 7 mm (1/4") barb.

A simple plastic tap with 1/4'' stem that fits directly to 1/4'' Pushfit/John Guest fittings.

Mangrove Jack´s Kegerator complete with 3 taps. Stainless steel faucets Better balanced beer hoses to reduce foaming. Easy to install beer and gas pipes with push-fit components. Fan cooling system for the crane tower for improved cooling in the tap tower and thus better pouring. Digital thermostat with wide temperature range -2.2 - 27.8 C (26-82 F). Robust MKIII CO2 Regulator. Stainless steel door. Drip tray. Tower fan. Glass shelf and cooling shelves included Stainless steel floor for extra barrel support Mangrove Jack's 3-Tap Kegerator contains: • 4 x Screws for the tapping tower • 1 x CO2 gas regulator • 1 x CO2 cylinder holder • 1 x 4-way Push Fit Splitter 5/16 • 1 x Refrigerator • 1 x Stainless steel tower • 1 x drip tray • 3 x SS Ultra Taps • 3 x Beer MFL Ball Couplings • 3 x Gas MFL Ball Couplings • 6 x MFL 8 mm Push Fit • 7 x beer / gas pipes 1.4m 4mm ID 8 mm OD • 4 x Wheels • 16 x Wheel screwsInstructions

Fill any beverage into any bottle, can, jar or glass automatically with this internet connected, RAPT enabled, Cannular Can and Bottle Filler. More sanitary and easier to use than other competitors.This Cannular Can and Bottle filler is ideally used for bottle cans or even glasses.  Using two adjustable stainless steel tubes it will use one to purge oxygen out of the vessel and then use the second one to fill the vessel to a precise level based on an internal pressure sensor.  OLED Digital DisplayThe OLED display makes calibration super easy.  It also enables you to keep track of filling speed, number of cycles/fills, purge time, fill height and also enables you to make on-the-fly adjustments to your filling requirements so you can conveniently tweak the settings while filling. Integrated Ball Lock ConnectorsThe integrated ball lock connectors allow you to quickly attach your beer and gas ball lock disconnects.  We recommend the use of the Duotight Ball Lock Disconnects in Gas and Liquid to connected to these input and outputs. Integrated Pinch ValveThe integrated pinch valve is one of the things that makes this unit far superior to other filling machines.  The pinch valve enables you to easily remove the beer line for cleaning so the stainless tube, silicone hose and yellow carbonation cap/ball lock disconnect removes completely and can be put into the dishwasher or cleaned in the sink.  The pinch valve is mechanically simple and therefore reliable.  It is not subject to small particles like hops getting stuck in the device and eliminates the need for pre-filtration.  It pinches down on the silicone tube to shut off the flow.  This design also enables laminar flow that reduces fobbing.  The pinch valve improves reliability, makes it easier to operate and a piece of cake to clean. Integrated RegulatorOther filling machines require an external regulator that may need to drop the pressure lower than your normal keg dispense pressure.  Unlike these other fillers this filler has an integrated regulator which saves time and setup cost. This integrated regulator means you will not damage your machine by accidentally connecting it to a high pressure gas source.  You can hook up your gas line without the need for another external regulator or to fool around with your gas supply at all.  Just set the integrated regulator once during setup and forget about it. Multi-PurposeThe long stainless tubes and adjustable height make this device useful for pretty much any bottles up to 30cm heigh or cans up to 27cm heigh.  It can also be used for still or carbonated beverages.  So this device is useful for wine bottles, beer cans, champagne, crown seal bottles and pretty much any other bottle/can/vessel that has a neck opening greater than 15mm.  It can also be used for filling glasses, jars or other vessels. Fill ProfilesSome other machines require a full calibration to change from one vessel type to another.  This machine allows you to pre-save fill profiles depending on what you are doing.  Save a filling profile for your 300ml Cans and then save a different filling profile for your 750ml wine bottles.  Use our pre-saved presets or alternatively make your own fill profiles with different purge time and fill height.  These are also synced with the RAPT.io portal so you can save profiles and share them with friends or deploy to several other devices. RAPT.io Connected (via Wifi)As well as all the features above this filler connects to your Wifi and keeps track of your Cans Per Minute (CPM), fill speed and even temperature (if you purchase the external probe separately).  It will log all usage information so you can keep track of how your machine is running or even keep track of you staff to make sure they are cycling the machine at an acceptable rate.  The connectivity to the RAPT.io portal will enable you to more easily change settings, update profiles and keep track of your fill days so you can historically keep track of how your fill day went and which day you processed each batch.  Low DO PickupThe quality and longevity of your beverage is often defined by how well you keep oxygen off your product.  This filler purges the oxygen out of the can and will enable you to get substantially lower dissolved oxygen. Wall Mounted DesignThis type of can and bottle filler has primarily been designed for wall mounting configuration.  This allows you to bring a can or bottle up to the filler from the underside of the unit.  To wall mount this unit you can download and print this template.

This fantastic product has been designed by KegLand so you can dispense kegs on the run.  Don't bother bringing people to the bar, now you can take the kegs to the people. This awesome keg backpack is the only one of it's type in Australia and it's exclusive to KegLand. Cylinder, keg, beer gun and regulator sold separately. The JetKeg is an exclusive KegLand product that enables you to walk through a crowd and dispense a whole keg in far less time than what it would take for each person to come up to the bar.  It's a backpack designed to dispense and keep a keg cold. Great for parties, public events, caterers, or any even that requires many drinks to be dispensed in a short period. Ever been to a music festival and wanted to take your awesom kegged product but cant be bothered luging around all the gear.  The JetKeg solves this problem.  Turn up to the event with one of these and you will be an instant legend. This product has been designed with durable buckles, strong nylon straps, waist strap and fully hot tape seamed internal lining that is waterproof so no dripping water all over the floor. JetKeg Pack Includes:1 x JetKeg Back Pack1 x Black Nylon Pluto Gun (duotight compatible)1 x 6.5mm x 8mm duotight reducer (for pluto gun)1 x PreCut length of 4mm x 8mm EVABarrier HoseDoes not include gas fittings or disconnects/coupler This product has been designed to take a 19L Corny Brewing Keg or a 20L commercial keg (pony keg) which are sold searpately.