Keggning

This blow gun is easy to use to replace the air in fermenters, kegs or bottles with CO2 before they need to be refilled. Carbon dioxide is heavier than oxygen, which means that the oxygen is displaced and the risk of oxidation of the beer is reduced. The blowgun fits directly onto a 425g SodaStream-type carbonation cartridge without an additional adapter. Press the trigger to blow CO2 from the carbonation tube. Fits 3/8" hose. It can also be used instead of a regulator in a draft beer plant. The gun has a safety valve that triggers at 1 bar. This is a good serving pressure for most types of beer. When the safety valve beeps, you know that the pressure in the barrel is 1 bar.Please note that the gas tube, hose and barrel coupling are not included.

Carbon dioxide cartridges for sodasiphones, cartridges can be used in sodasiphones or along with adapter to mini regulators. CO2 Cartridges 16g 10 pack contains: 10 psc CO2 cartridges of steel. A cartridge contains about 16.3 grams of carbon dioxide gas. (Note! Appearance and labeling may vary)

Cornelius keg 23 liter (6 gallon) with ball-lock and protective rubber around the ball locks and bottom. Very high quality.PPRV (Pressure Release Valve): 7-9 Bars (100-135 PSI)Materials: Stainless steel SS304 and rubberHeight: 670 mm (± 2 mm)Diameter: 228 mm (± 2 mm)Weight: 4.8 kg (shipping weight 10 kg)Made by A.E.B. In Italy

Gas Manifold - CO2 Manifold 5-Way 1/4" MFL - can be used to connect several kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves. The input and outputs have MFL threads. These are compatible with quick connectors with FFL threads from DuoTight and John Guest, among others.(Hint: MFL stands for Male-, FFL stands for Female-). - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) MFL (fits 7/16" - 20UNF FFL).- Behind the MFLs there is a 1/4'' thread for e.g. ball locks with MFL thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.

Gas distributor 3 outputs 1/4 nipple. Perfect when you build a kegerator and want to be able to have several barrels on the same carbon dioxide tube and then also have the option to turn off or on the gas to each barrel.

This fantastic product has been designed by KegLand so you can dispense kegs on the run.  Don't bother bringing people to the bar, now you can take the kegs to the people. This awesome keg backpack is the only one of it's type in Australia and it's exclusive to KegLand. Cylinder, keg, and regulator sold separately. The JetKeg is an exclusive KegLand product that enables you to walk through a crowd and dispense a whole keg in far less time than what it would take for each person to come up to the bar.  It's a backpack designed to dispense and keep a keg cold. Great for parties, public events, caterers, or any even that requires many drinks to be dispensed in a short period. Ever been to a music festival and wanted to take your awesom kegged product but cant be bothered luging around all the gear.  The JetKeg solves this problem.  Turn up to the event with one of these and you will be an instant legend. This product has been designed with durable buckles, strong nylon straps, waist strap and fully hot tape seamed internal lining that is waterproof so no dripping water all over the floor. JetKeg Pack Includes:1 x JetKeg Back Pack1 x Black Nylon Pluto Gun (duotight compatible)1 x 6.5mm x 8mm duotight reducer (for pluto gun)1 x PreCut length of 4mm x 8mm EVABarrier HoseDoes not include gas fittings or disconnects/coupler This product has been designed to take a 19L Corny Brewing Keg or a 20L commercial keg (pony keg) which are sold searpately.

Trapets Adaptor. Tired of losing gas every time you connect or disconnect your sodastream cylinder to your normal sodastream cylinder adaptor. This new design is what you need. Unlike our cheaper sodastream cylinder adaptors, this adapter has the added advantage that you can use the side thumb screw to depress the pin in the middle of the adaptor.  This pin adjustment makes the sodastream cylinder adaptor significantly easier to use. Normal sodastream adaptors require an alan key to adjust the pin height and depending on how worn out your seal is you may need to adjust this pin periodically.  Also conventional cheaper sodastream adaptors also tend to leak gas every time you connect and disconnect them from your regulator or the adaptor itself.  This is also a pain.  This new sodastream adaptor design is significant better designed with the handy thumb screw on the side of the unit allowing you to eliminate cumbersome adjustment and it also gives you the ability to turn off and on the gas flow. This adaptor is used if you have a SodaStream Cylinder and wish to use a conventional Type 30 Regulator with it, perhaps for bbq or picnic and you don't want to carry your 6kg or 2.6kg Gas Cylinder this is the adaptor that will enable you to make a handy portable system. Ideal for the low volume user or someone who hasn't bit the bullet in a big cylinder. *does not include regulator or gas canister

Manometer Low Pressure 0-4500 psi for CO2 - 1/4" NPT. Spare part for CO2 regulator. Manometer for reading the pressure into the regulator. Measures 0-300 bar (0-4500 psi).This is the same pressure gauge that comes fitted to the MK4/MK5 regulator from Kegland. The pressure gauge fits most CO2 regulators with 1/4" NPT thread. Please note that these regulators have left-hand threaded pressure gauges. Then this one will not fit.

Manometer Low Pressure 0-100 psi for CO2 - 1/4" NPT. Spare part for CO2 regulator. Manometer for reading the pressure into the regulator. Measures 0-7 bar (0-100 psi).This is the same pressure gauge that comes fitted to the MK4 regulator from Kegland. The pressure gauge fits most CO2 regulators with 1/4" NPT thread. Please note that these regulators have left-hand threaded pressure gauges. Then this one will not fit.

Actuator Regulator in a robust and functional design for Sodastream cylinder and Co2 Cartridges w/thread. The Co2 flow is first activated when the piston at the top is screwed down into the pawl of the Co2 cylinder or penetrates the cartridge, ensuring that no Co2 is lost or escapes before the Co2 cylinder or cartridge is fully in place.Remove the bottom peace when mounting the regulator on a Sodastream cylinder. The design of the regulator allows for the cylinder to hang on the side of a Cornelius keg.- 2 outputs, one at a 45° angle, which fits a normal plastic ball lock and one at a 90° angle for stainless steel ball locks.- Coupling with thread that fits ball locks- 6.5mm (1/4") Duotight compatible hose barb- The manometer is well protected by a metal housing. The manometer can be interchangeable with other scales.- 65 psi/4.5 bar pressure relief valve which can be interchangeable with other pressure relief valves. Please note this is not compatible with 2 or 6 kg Co2 cylinders.WARNING:Do not overtighten the regulator onto your Co2 cylinder. It is recommended to use a spanner to hold the Sodastream cylinder while attaching and detaching the regulator.

Dual Pressure CO2 regulator MK4. Precise regulator of high quality. These are 2 MK4 regulators that are connected together, so that you get 2 outputs with individual pressure adjustment.  Thread type for connecting CO2 bottle: Type 30 (Australia/NZ), compatible with Nordic CO2 standard DIN-477 No. 6 / W 21.8 x 1/14" The outputs have 1/4" MFL threads, and it comes with 2 DuoTight (pushfit) adapters for 8mm (5/16") hose.  Recommended range of use: 0 to 3.5 bar

These 29L stainless steel vessels are designed just like a commercial beer keg but with a large 10cm (4inch) tri-clover opening at the top so you can easily get inside the keg to clean it out. This new 29L Size is perfect for doing 20-25L batches so you have a bit of spare head space inside the Kegmenter.This the stainless steel Kegmenter comes with airlock and flat plate however you can also use this kegmenter under pressure if you want to. If you want to use this Kegmenter under pressure then we would recommend that you purchase the lid with ball lock posts and pressure relief vale.The Kegmenter can hold 2.5bar which makes it possible to carbonate and ferment in the same vessel. You can force carbonate using the Pressure Kit (sold seperately).Being able to hold pressure also means you can push the beer out of the fermenter directly through a filter or even dispense directly from fermenter to draft beer tap if you wanted to.SpecificationsVolume: 29L (7.6 Gallons)Maximum Working Pressure: 2.5 BARTest Pressure: 5 BAR Wall Thickness (Body/Chimes): 1.8mm/2.1mmDiameter: 39,5cmHeight: 38cmMaterial: 304 Stainless steelDatasheetClick here to open the datasheet

Mangrove Jack´s Kegerator complete with 3 taps. Stainless steel faucets Better balanced beer hoses to reduce foaming. Easy to install beer and gas pipes with push-fit components. Fan cooling system for the crane tower for improved cooling in the tap tower and thus better pouring. Digital thermostat with wide temperature range -2.2 - 27.8 C (26-82 F). Robust MKIII CO2 Regulator. Stainless steel door. Drip tray. Tower fan. Glass shelf and cooling shelves included Stainless steel floor for extra barrel support Mangrove Jack's 3-Tap Kegerator contains: • 4 x Screws for the tapping tower • 1 x CO2 gas regulator • 1 x CO2 cylinder holder • 1 x 4-way Push Fit Splitter 5/16 • 1 x Refrigerator • 1 x Stainless steel tower • 1 x drip tray • 3 x SS Ultra Taps • 3 x Beer MFL Ball Couplings • 3 x Gas MFL Ball Couplings • 6 x MFL 8 mm Push Fit • 7 x beer / gas pipes 1.4m 4mm ID 8 mm OD • 4 x Wheels • 16 x Wheel screwsInstructions

Small stainless mini keg with lid. Easy to fit at home in the refrigerator and easy to carry bring on a picnic or party. See related products below to add ball lock lids of different types for your application.Material: 304 Stainless steel Volume: 5 liters Height: ca 29.2 cmDiameter: ca 17.4 cm Working pressure: 4 bar (60 psi)Maximum pressure: 8 bar (120 psi)

Now you can very easily make a mini-keg from an ordinary PET bottle! With these couplings it becomes like a barrel with ball lock couplings and you can transfer the whole end, as if it were a cornelius barrel. Ingenious as a simple growler or for example for cleaning the tap line without needing an empty keg. PET Ball Lock Kit contains:- two plastic ball lock couplings for PET threads- a T-piece (Carbonation Cap Tee Adapter) for PET- a silicone hose of 30 cm.The ball lock couplings work for both beer and gas (CO2).  (bottles not included)

Rubber seal for Trapets Adaptor (type 2.3)

This trapets adapter in nickel plated brass allows you to attach 425 g aluminum CO2 cylinders to a CO2 regulator with standard W21.8x1/14" threads.Version 2.3 features a spring pressure screw, that makes it no longer necessary to make adjustments for different brands of CO2 cylinders in most cases.Comes equipped with a safety vent hole to minimize the risk of damaging the gasket when unscrewing it from the CO2 cylinder with remaining pressure.Made in Sweden.

Brass trapetz adapter for 425g co2 flasks, for example Sodastream.