Reviews

0 reviews
Rating

You might also need

Cooling Spiral 7,5m Quick Connector

Cooling Spiral 7,5m Quick Connector

Cooling Spiral 7,5m in stainless steel for faster cooling of the wort. The fittings fit 3/4-inch Quck Connect garden hose connectors.Spiral tube diameter: ca 10 mmSpiral height: ca 90 mmTotal height: ca 400 mmTotal spiral diameter: ca 255 mmThreads: 3/4" (fit 3/4-inch Gardena-style garden hose connectors)

441 kr
407 kr
DEAL
Temporarily out of stock
View product
Brewly Chiller 8,8m with Quick Connectors

Brewly Chiller 8,8m with Quick Connectors

Brewly Chiller 8,8m in Stainless Steel with optimized distance between the spirals for faster cooling of the wort. Includes Quick Connectors (3/4-inch) that are Gardena system-compatible.Suitable for breweries, pots and kettles up to 40L.Spiral diameter: ca 25 cmSpiral height: ca 25 cmTotal height: ca 39 cmCooling spiral length: 8,8 meters.

407 kr
Brewly BWH30L 30L Brewery & Water Heater

Brewly BWH30L 30L Brewery & Water Heater

The Brewly BWH30L is an efficient, compact 2500W semi-automatic brewer with adjustable malt basket for efficient sparging, bazooka bottom filter and tap. You mash, blanch and boil in the same vessel - Cooling coil sold separately. Via the clear digital display, you can easily set the temperature and time. Can also be used as a sparge water kettle.The malt is placed in a malt basket with a perforated insert that can be easily lifted up with the steel handle in two steps for easy leaching after mashing.Internally, there is a volume level gauge set on the stainless steel wall.Brewly BWH30L Brewery- Material: Polished stainless steel (AISI 304)- Brewing volume: 30 liters (max), at least 15L batches are recommended.- Total volume: 35 litres- Digital Controller with clear display - Set temperature and time.- Temperature range 25°C to 100°C, adjustable in steps of 0.1°C.- Temperature control up to 100°C, with +-1°C accuracy.- Power: 2500W in total (adjustable in 700W and 1800W, or both elements at the same time which gives 2500W). 10-16A fuse is recommended. The heating elements are placed under the base to avoid caramelization of the wort and to reduce burning.- Malt basket with steel handle: Can be raised in several steps.- Maximum recommended malt quantity is 8 kg.- Tap with Bazooka mesh-screen filter (raised Mesh-screen bottom filter for efficient separation of hops from the wort)- Strong glass lid- Height: 67 cm- Diameter: 36 cm (without handle and faucet)- Weight: 10 kg (freight carrying weight 40 kg)- Instruction manual- EU-power plug (UK power plug not included)- 220-240V 50/60Hz- Instructions Manual in EnglishMash water calculation:mash water in liters = (amount malt in kilos * 2,5) + 10L.Note: 2,5 is the ratio between water and malt, ie how thick the mash is going to be. This ratio can be varied between approx 2,2-3. 10L is the volume of water below the malt basket inside the brewery.Example: For a 20L recipe with 6kg malt the mash water calculation is as following: 6*2,5+10 = 25L.Sparging: For a 20L recipe, sparge with 78-degree C water up to the 25L mark, and then start the boil (you may start heating the wort while sparging to save time).

2 035 kr
1 696 kr
DEAL