The Brewly BWH30L is an efficient, compact 2500W semi-automatic brewer with adjustable malt basket for efficient sparging, bazooka bottom filter and tap. You mash, blanch and boil in the same vessel - Cooling coil sold separately. Via the clear digital display, you can easily set the temperature and time. Can also be used as a sparge water kettle.The malt is placed in a malt basket with a perforated insert that can be easily lifted up with the steel handle in two steps for easy leaching after mashing.Internally, there is a volume level gauge set on the stainless steel wall.Brewly BWH30L Brewery- Material: Polished stainless steel (AISI 304)- Brewing volume: 30 liters (max), at least 15L batches are recommended.- Total volume: 35 litres- Digital Controller with clear display - Set temperature and time.- Temperature range 25°C to 100°C, adjustable in steps of 0.1°C.- Temperature control up to 100°C, with +-1°C accuracy.- Power: 2500W in total (adjustable in 700W and 1800W, or both elements at the same time which gives 2500W). 10-16A fuse is recommended. The heating elements are placed under the base to avoid caramelization of the wort and to reduce burning.- Malt basket with steel handle: Can be raised in several steps.- Maximum recommended malt quantity is 8 kg.- Tap with Bazooka mesh-screen filter (raised Mesh-screen bottom filter for efficient separation of hops from the wort)- Strong glass lid- Height: 67 cm- Diameter: 36 cm (without handle and faucet)- Weight: 10 kg (freight carrying weight 40 kg)- Instruction manual- EU-power plug (UK power plug not included)- 220-240V 50/60Hz- Instructions Manual in EnglishMash water calculation:mash water in liters = (amount malt in kilos * 2,5) + 10L.Note: 2,5 is the ratio between water and malt, ie how thick the mash is going to be. This ratio can be varied between approx 2,2-3. 10L is the volume of water below the malt basket inside the brewery.Example: For a 20L recipe with 6kg malt the mash water calculation is as following: 6*2,5+10 = 25L.Sparging: For a 20L recipe, sparge with 78-degree C water up to the 25L mark, and then start the boil (you may start heating the wort while sparging to save time).

Brewery 30L with 8,8m chiller. The Brewly BWH30L is an efficient, compact 2500W semi-automatic brewer with adjustable malt basket for efficient sparging, bazooka bottom filter and tap. You mash, blanch and boil in the same vessel - Cooling coil chiller 8,8m included. Via the clear digital display, you can easily set the temperature and time. Can also be used as a sparge water kettle.The malt is placed in a malt basket with a perforated insert that can be easily lifted up with the steel handle in two steps for easy leaching after mashing.Internally, there is a volume level gauge set on the stainless steel wall.Brewly BWH30L Brewery- Material: Polished stainless steel (AISI 304)- Brewing volume: 30 liters (max), at least 20L batches are recommended.- Total volume: 35 litres- Digital Controller with clear display - Set temperature and time.- Temperature range 25°C to 100°C, adjustable in steps of 0.1°C.- Temperature control up to 100°C, with +-1°C accuracy.- Power: 2500W in total (adjustable in 700W and 1800W, or both elements at the same time which gives 2500W). 10-16A fuse is recommended. The heating elements are placed under the base to avoid caramelization of the wort and to reduce burning.- Malt basket with steel handle: Can be raised in several steps.- Maximum recommended malt quantity is 8 kg.- Tap with Bazooka mesh-screen filter (raised Mesh-screen bottom filter for efficient separation of hops from the wort)- Strong glass lid- Height: 67 cm- Diameter: 36 cm (without handle and faucet)- Weight: 10 kg (freight carrying weight 40 kg)- Instruction manual- EU-power plug (UK power plug not included)- 220-240V 50/60Hz- Instructions Manual in EnglishMash water calculation:mash water in liters = (amount malt in kilos * 2,5) + 10L.Note: 2,5 is the ratio between water and malt, ie how thick the mash is going to be. This ratio can be varied between approx 2,2-3. 10L is the volume of water below the malt basket inside the brewery.Example: For a 20L recipe with 6kg malt the mash water calculation is as following: 6*2,5+10 = 25L.Sparging: For a 20L recipe, sparge with 78-degree C water up to the 25L mark, and then start the boil (you may start heating the wort while sparging to save time).

The Brewster Dominator 40 from Brewolution is an impressive Display- or App-controlled brewing system packed with innovative features and engineered for optimal brewing efficiency with the ideal dimensions. Its 3000-watt heating element ensures rapid boiling, while the intuitive app provides seamless control. With a 10 kg malt capacity, low watt density, and CIP-ready design, it’s built for ease, precision, and efficiency - perfect for both hobbyists and serious brewers. Premium Quality for the Best Value. Brew from 7L to 35L of beer. Its upgradable to 65L total volume with the Extension Kit. Advanced App Control: Easily monitor and control every aspect of your brewing process remotely with the intuitive Brewster Dominator app. High Brewing Capacity: Brew large batches with ease thanks to the 10 kg malt capacity, perfect for crafting rich, full-bodied beers. Rapid Heating Power: Equipped with a 3000-watt heating element (100-3000W), the system delivers fast and efficient boil times, ensuring quick and precise brewing. Low Watt Density Heating: Prevents scorching and caramelisation by distributing heat evenly, ensuring cleaner, lighter beers and easier cleaning. CIP-Ready for Easy Cleaning: The system is designed for Clean-in-Place (CIP) cleaning, allowing you to effortlessly maintain hygiene between brews. The remaining cool facts about the Brewster Dominator:- High-Quality Stainless Steel: Made from durable AISI 304 stainless steel.- Weight: 13 kg for sturdy and reliable brewing.- Large Malt Surface: Ensures maximum brewing efficiency.- Capacity: Brew up to 35 Liters, with a total capacity of 40 Liters.- Compact Dimensions: 51 cm in height and 40.5 cm in diameter.- Adjustable Heating Element: Power ranges from 100 W to 2500 W in 100 W increments.- Precise Temperature Control: Adjustable from 25°C to 100°C with 0.1°C precision, and a deviation of just ±1°C.- Integrated Circulation: Flow rate is easily adjustable for optimal brewing performance.- Convenient Grain Basket Lifting: Removable handle is compatible with a Ratchet Pulley for effortless grain basket lifting.- Stainless Steel Grain Basket: Also made thicker and from durable AISI 304 stainless steel.- Clear LCD Monitor: Easy-to-read display for convenient operation.- Flexible Control Options: Choose between manual or automatic programming, with alarms and reminders for key steps.- Customisable Brewing Steps: Program up to 9 mashing steps and 9 hop or spice additions.- Intergrated Powerful Magnetic Pump: The 230 V pump with digital control has a capacity of 12 L/min.- Glass Lid: Allows for easy visual monitoring throughout the mashing process.- Minimum Batch Size: Capable of brewing as little as 7 litres.- Quality Tested: Every Brewster Dominator is tested before shipping for reliability.- Spare Parts & Support: Fast and reliable customer service with spare parts available through Brewolution.- Power Supply: 220 V, 50 Hz, 13 amp. Despite its powerful 3000-watt heating element and pump, it remains compatible with a standard home setup.- Weight: 13 kg- Dimensions: 51 cm height, 40.5 cm diameter- Adjustable Temperature: From 25°C to 100°C with a deviation of ±1°C- Magnetic Pump Capacity: 12 L/min- Minimum Batch Size: Capable of brewing as little as 7 litres- Glass Lid: For clear visual monitoring during mashing