Sanitation & Cleaning

Sanipro Rinse is a foaming, environment friendly, anionic acid based final rinse for sanitizing equipment. It is odour free, tasteless, does not leave any spots, and contains a corrosion inhibitor that makes it ideal for stainless steel and sensitive surfaces. The self foaming action allows the product to get in everywhere and do it's job. Stable across a very wide temperature range. Use it as a final rinse - rinsing with water afterwards is not necessary or recommended. Just let air dry. Tip: Always have a spray bottle pre mixed with diluted Sanipro at hand.Made in Sweden.Dosage1 cap (12,5 ml or 0,5 fl.oz) per 10 liters of water.Recommended contact time is at least 1 minute.Volume250 ml / 8.5 fl.oz

Sanipro Rinse is a foaming, environment friendly, anionic acid based final rinse for sanitizing equipment. It is odour free, tasteless, does not leave any spots, and contains a corrosion inhibitor that makes it ideal for stainless steel and sensitive surfaces. The self foaming action allows the product to get in everywhere and do it's job. Stable across a very wide temperature range. Use it as a final rinse - rinsing with water afterwards is not necessary or recommended. Just let air dry. Tip: Always have a spray bottle pre mixed with diluted Sanipro at hand.Made in Sweden.Dosage1 cap (12,5 ml or 0,5 fl.oz) per 10 liters of water.Recommended contact time is at least 1 minute.Volume1000 ml / 34 fl.oz

Sanipro Rinse is a foaming, environment friendly, anionic acid based final rinse for sanitizing equipment. It is odour free, tasteless, does not leave any spots, and contains a corrosion inhibitor that makes it ideal for stainless steel and sensitive surfaces. The self foaming action allows the product to get in everywhere and do it's job. Stable across a very wide temperature range. Use it as a final rinse - rinsing with water afterwards is not necessary or recommended. Just let air dry. Tip: Always have a spray bottle pre mixed with diluted Sanipro at hand.Made in Sweden.Dosage1 cap (12,5 ml or 0,5 fl.oz) per 10 liters of water.Recommended contact time is at least 1 minute.Volume5000 ml / 169 fl.oz

Chemipro-Oxi Sanitizer

Coobra VWP can be used to clean and sanitize all types of home brewing equipment. 100g is enough for up to 350L. Needs to be rinsed off with water after use. Alternative to cleaners such as PBW.

VWP can be used to clean and sanitize all types of home brewing equipment. 100g is enough for up to 110L. Needs to be rinsed off with water after use. Alternative to cleaners such as PBW.This sterliser comes in a sturdy tub and contains the steriliser in a white powder, its as simple as adding a level teaspoon to your primary fermentation bucket and filling it with some water, add all your equipment to the bucket and leave to sit in the solution for approx 15 minutes, rinse and that's it ready for use

VWP can be used to clean and sanitize all types of home brewing equipment. 400g is enough for up to 440L. Needs to be rinsed off with water after use. Alternative to cleaners such as PBW.This sterliser comes in a sturdy tub and contains the steriliser in a white powder, its as simple as adding a level teaspoon to your primary fermentation bucket and filling it with some water, add all your equipment to the bucket and leave to sit in the solution for approx 15 minutes, rinse and that's it ready for use

Star San is a high foam, final acid anionic rinse for sanitizing equipment. It contains a blend of phosphoric acid and dodecylbenzenesulfonic acid. This synergistic blend is unaffected by excessive organic soils.Star San is also a self-foaming acid anionic detergent. It can be applied through a foamer to produce self-adhering foam or manual application. Cleaning with Star San on a daily basis will leave equipment in an acid condition that will eliminate water spotting, mineral build-up, and corrosion. Dosage: 15 ml per 10 liters of water.Contact time: 3 minutes.

Star San is a high foam, final acid anionic rinse for sanitizing equipment. It contains a blend of phosphoric acid and dodecylbenzenesulfonic acid. This synergistic blend is unaffected by excessive organic soils.Star San is also a self-foaming acid anionic detergent. It can be applied through a foamer to produce self-adhering foam or manual application. Cleaning with Star San on a daily basis will leave equipment in an acid condition that will eliminate water spotting, mineral build-up, and corrosion. Dosage: 15 ml per 10 liters of water.Contact time: 3 minutes.

Star San is a high foam, final acid anionic rinse for sanitizing equipment. It contains a blend of phosphoric acid and dodecylbenzenesulfonic acid. This synergistic blend is unaffected by excessive organic soils.Star San is also a self-foaming acid anionic detergent. It can be applied through a foamer to produce self-adhering foam or manual application. Cleaning with Star San on a daily basis will leave equipment in an acid condition that will eliminate water spotting, mineral build-up, and corrosion. Dosage: 15 ml per 10 liters of water.Contact time: 3 minutes.

Star San is a high foam, final acid anionic rinse for sanitizing equipment. It contains a blend of phosphoric acid and dodecylbenzenesulfonic acid. This synergistic blend is unaffected by excessive organic soils.Star San is also a self-foaming acid anionic detergent. It can be applied through a foamer to produce self-adhering foam or manual application. Cleaning with Star San on a daily basis will leave equipment in an acid condition that will eliminate water spotting, mineral build-up, and corrosion. Dosage: 15 ml per 10 liters of water.Contact time: 3 minutes.

This High Performance Cleaner is specially formulated to be used with the Grainfather. It removes hard to clean proteins from your Grainfather without the need for tedious scrubbing. Perfect for cleaning hard to reach places such as the counter flow wort chiller, pipes and pumps.This is suitable for soft (copper) and hard (stainless steel) metals which not many other cleaners do. It is important you use this to clean your Grainfather as other cleaners may, over time, damage your system.Use- Add 2 Tbsp of cleaner to 15 L of water at 60°C to your Grainfather. - Attach the counter flow wort chiller and recirculate the cleaner for 15 minutes. - Remove the counter flow wort chiller and attach the recirculation pipe and recirculate for another 5 minutes. - Rinse all surfaces that came in contact with the cleaner thoroughly with winter. - Gently scrub the inside of the boiler with a soft bristle brush to remove left over stains. Rinse and drain.

PBW (Powdered Brewery Wash) is a buffered alkaline cleaner with active oxygen and exemplary cleaning capacity. It is safe to use and harms neither you, the environment nor the equipment. PBW is at least as effective as caustic soda but is completely free of its negative features. PBW is used by breweries for CIP (Cleaning in Place) and is also very popular among home-brewers. Recommended dosage for home-brewers is 2 oz per 5 gallons, or 57 g per 19 litres, or 0.3%. This corresponds to 2 tbsp per 10 litres. Breweries usually use 1-2 oz per gallon, or 0.75-1.5%, depending on degree of contamination. For lighter cleaning a lower concentration will suffice. Recommended contact time is 30 minutes for mashing, sparging and boiling vessels and barrels, and 5-10 minutes for hoses. Longer contact time than three hours can be dangerous to the equipment and especially plastic details which are much more sensitive than steel and glass. Recommended temperature: PBW can be used in a cold solution, but is more effective at higher temperatures. However, do not exceed 70 °C. Rinse with water afterwards.

PBW (Powdered Brewery Wash) is a buffered alkaline cleaner with active oxygen and exemplary cleaning capacity. It is safe to use and harms neither you, the environment nor the equipment. PBW is at least as effective as caustic soda but is completely free of its negative features. PBW is used by breweries for CIP (Cleaning in Place) and is also very popular among home-brewers. Recommended dosage for home-brewers is 2 oz per 5 gallons, or 57 g per 19 litres, or 0.3%. This corresponds to 2 tbsp per 10 litres. Breweries usually use 1-2 oz per gallon, or 0.75-1.5%, depending on degree of contamination. For lighter cleaning a lower concentration will suffice. Recommended contact time is 30 minutes for mashing, sparging and boiling vessels and barrels, and 5-10 minutes for hoses. Longer contact time than three hours can be dangerous to the equipment and especially plastic details which are much more sensitive than steel and glass. Recommended temperature: PBW can be used in a cold solution, but is more effective at higher temperatures. However, do not exceed 70 °C. Rinse with water afterwards.

PBW (Powdered Brewery Wash) is a buffered alkaline cleaner with active oxygen and exemplary cleaning capacity. It is safe to use and harms neither you, the environment nor the equipment. PBW is at least as effective as caustic soda but is completely free of its negative features. PBW is used by breweries for CIP (Cleaning in Place) and is also very popular among home-brewers. Recommended dosage for home-brewers is 2 oz per 5 gallons, or 57 g per 19 litres, or 0.3%. This corresponds to 2 tbsp per 10 litres. Breweries usually use 1-2 oz per gallon, or 0.75-1.5%, depending on degree of contamination. For lighter cleaning a lower concentration will suffice. Recommended contact time is 30 minutes for mashing, sparging and boiling vessels and barrels, and 5-10 minutes for hoses. Longer contact time than three hours can be dangerous to the equipment and especially plastic details which are much more sensitive than steel and glass. Recommended temperature: PBW can be used in a cold solution, but is more effective at higher temperatures. However, do not exceed 70 °C. Rinse with water afterwards.

Bottle Brush for wine bottles 45cm

Hygiene Plug with brush for tap

Stackable bottle stand / drying stand with up to 25/16 bottles per layer. can be expanded and stacked in up to 7 layers. Made in food-approved plastic.

Smooth bottle washer with nozzle and quick coupler for cleaning eg in bottles, barrels and vessels that are otherwise difficult to clean thoroughly. The model is multijet so it sprays out the water in high pressure in different directions for efficient cleaning. With quick coupling switch on tap. Hose with coupling, handle and nozzle included. Nozzle can be switched so you can have several different sizes of the nozzle to the same handle. Nozzle is included.

Better Brew Bottle Brush

Better Brew Bottle Brush 46cm Straight. Food grade. Colour may vary.

Better Brew Barrel Brush 91cm Extra Long. Food grade materials. Colours may vary.

Better Brew Bottle Brush 46cm Cranked. Food grade. Colour may vary.

Smooth bottle washer with nozzle and quick coupler for cleaning eg in bottles, barrels and vessels that are otherwise difficult to clean thoroughly. The model is multijet so it sprays out the water in high pressure in one direction for efficient cleaning. With quick coupling switch on tap. Hose with coupling, handle and nozzle included. Nozzle can be switched so you can have several different sizes of the nozzle to the same handle. Nozzle is included.

Chemclean from Chemisphere UK is a very effective alkaline cleaner that can be used both hot and cold, and is widely used by brewers for rough cleaning of brewing equipment, yeast tanks, cornelius barrels and the like. The detergent is effective on stainless steel, soft metals, plastic and glass.Chemclean removes proteins, stains, carbon and fatty acids and gives excellent results in both hard and soft water.Equivalent to PBW, Craftclean and similar alkaline cleaning products.Instructions for use:- Mixing ratio: Dissolve 50 g of Chemclean in 5 liters of water for manual cleaning (scrubbing). 50 g per 20 liters of water when soaking. The dosage can be increased up to 5% depending on the dirt conditions.- Remove as much loose dirt as possible by rinsing equipment and containers before cleaning.- Manual cleaning: Scrub all surfaces with the cleaner until all surfaces are clean.- Circulation cleaning: Use 50 g per 20 liters of water for fermentation vessels, barrels, tanks and other equipment. Circulate for 30 minutes with temperature up to 60°C. Mixing ratio and circulation time may need to be adjusted depending on the amount of dirt.- Soaking: Ensure that all equipment to be cleaned is completely submerged. Soak for 4 hours at temperature up to 60°C, or soak cold overnight. Rinse equipment thoroughly after cleaning. The solution can be reused during the cleaning process. Do not use on Teflon-coated surfaces.Hazard warning:Chemclean - UN 3262 Danger - Contains sodium carbonate & sodium metasilicate pentahydrate. Keep out of reach of children. Use protective gloves/protective clothing/eye protection/face protection.Precautions - Harmful if swallowed. Causes severe skin burns and eye damage. May irritate the respiratory system. Do not inhale dust/fume/gas/mist/vapour/spray. Wash hands thoroughly after use. Do not eat, drink or smoke while using this product. Have the product container or label available if you need medical advice.In case of contact with eyes: Rinse thoroughly with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.In case of ingestion: Contact the Poisons Information Center/doctor/if you feel unwell. Rinse your mouth. DO NOT induce vomiting.In case of contact with skin (or hair): Immediately remove all contaminated clothing. Rinse the skin with water/shower. If skin irritation occurs: Seek medical attention.In case of inhalation: Move the person to fresh air and keep the person in a position that facilitates breathing.