Sparge Water Heaters

The Brewly BWH30L is an efficient, compact 2500W semi-automatic brewer with adjustable malt basket for efficient sparging, bazooka bottom filter and tap. You mash, blanch and boil in the same vessel - Cooling coil sold separately. Via the clear digital display, you can easily set the temperature and time. Can also be used as a sparge water kettle.The malt is placed in a malt basket with a perforated insert that can be easily lifted up with the steel handle in two steps for easy leaching after mashing.Internally, there is a volume level gauge set on the stainless steel wall.Brewly BWH30L Brewery- Material: Polished stainless steel (AISI 304)- Brewing volume: 30 liters (max), at least 15L batches are recommended.- Total volume: 35 litres- Digital Controller with clear display - Set temperature and time.- Temperature range 25°C to 100°C, adjustable in steps of 0.1°C.- Temperature control up to 100°C, with +-1°C accuracy.- Power: 2500W in total (adjustable in 700W and 1800W, or both elements at the same time which gives 2500W). 10-16A fuse is recommended. The heating elements are placed under the base to avoid caramelization of the wort and to reduce burning.- Malt basket with steel handle: Can be raised in several steps.- Maximum recommended malt quantity is 8 kg.- Tap with Bazooka mesh-screen filter (raised Mesh-screen bottom filter for efficient separation of hops from the wort)- Strong glass lid- Height: 67 cm- Diameter: 36 cm (without handle and faucet)- Weight: 10 kg (freight carrying weight 40 kg)- Instruction manual- EU-power plug (UK power plug not included)- 220-240V 50/60Hz- Instructions Manual in EnglishMash water calculation:mash water in liters = (amount malt in kilos * 2,5) + 10L.Note: 2,5 is the ratio between water and malt, ie how thick the mash is going to be. This ratio can be varied between approx 2,2-3. 10L is the volume of water below the malt basket inside the brewery.Example: For a 20L recipe with 6kg malt the mash water calculation is as following: 6*2,5+10 = 25L.Sparging: For a 20L recipe, sparge with 78-degree C water up to the 25L mark, and then start the boil (you may start heating the wort while sparging to save time).

Brewery 30L with 8,8m chiller. The Brewly BWH30L is an efficient, compact 2500W semi-automatic brewer with adjustable malt basket for efficient sparging, bazooka bottom filter and tap. You mash, blanch and boil in the same vessel - Cooling coil chiller 8,8m included. Via the clear digital display, you can easily set the temperature and time. Can also be used as a sparge water kettle.The malt is placed in a malt basket with a perforated insert that can be easily lifted up with the steel handle in two steps for easy leaching after mashing.Internally, there is a volume level gauge set on the stainless steel wall.Brewly BWH30L Brewery- Material: Polished stainless steel (AISI 304)- Brewing volume: 30 liters (max), at least 20L batches are recommended.- Total volume: 35 litres- Digital Controller with clear display - Set temperature and time.- Temperature range 25°C to 100°C, adjustable in steps of 0.1°C.- Temperature control up to 100°C, with +-1°C accuracy.- Power: 2500W in total (adjustable in 700W and 1800W, or both elements at the same time which gives 2500W). 10-16A fuse is recommended. The heating elements are placed under the base to avoid caramelization of the wort and to reduce burning.- Malt basket with steel handle: Can be raised in several steps.- Maximum recommended malt quantity is 8 kg.- Tap with Bazooka mesh-screen filter (raised Mesh-screen bottom filter for efficient separation of hops from the wort)- Strong glass lid- Height: 67 cm- Diameter: 36 cm (without handle and faucet)- Weight: 10 kg (freight carrying weight 40 kg)- Instruction manual- EU-power plug (UK power plug not included)- 220-240V 50/60Hz- Instructions Manual in EnglishMash water calculation:mash water in liters = (amount malt in kilos * 2,5) + 10L.Note: 2,5 is the ratio between water and malt, ie how thick the mash is going to be. This ratio can be varied between approx 2,2-3. 10L is the volume of water below the malt basket inside the brewery.Example: For a 20L recipe with 6kg malt the mash water calculation is as following: 6*2,5+10 = 25L.Sparging: For a 20L recipe, sparge with 78-degree C water up to the 25L mark, and then start the boil (you may start heating the wort while sparging to save time).

Brewly DWH30L Digital Water Heater 30L is a digital, double-walled 2500W thermostatically controlled leach water boiler for rapid heating of leach water - HLT (Hot Liquor Tank). With safety cap that needs to be rotated to open. Double walls for extra insulation so the heat is isolated better and the temperature is kept stable for longer. This leach water heater has the exact same ball valve that sits on Brewy's brewhouse, a professional product in stainless steel.Brewly DWH30L Digital Water Heater 30L- Quality construction in stainless steel (ANSI 304)- Double Wall - Double walls for extra insulation so the heat is insulated better and the temperature is kept stable for longer.- 2500W heating element for fast heating, adjustable to 700W, 1800W or 2500W- Built-in heating element under the bottom for easy cleaning- Accurate digital temperature control via knob, +/- 1°C- Thermostat setting 1-100/110°C (110°C for full effect)- Boil-Dry-Protection - Automatic protection in case of overheating- Safety lid that needs to be rotated to open- Stainless ball valve- Heavy duty handles for heavy lifting (do not move with boiling water inside)- Volume up to edge is 30L- 230V (50/60 Hz)

Brewly 20L Sparge Water Heater is a 2500W thermostat controlled heater/boiler for quick heating of sparge water - HLT (Hot Liquor Tank). This sparge water heater has the same ball valve tap as the Brewly Breweries, a stainless steel quality product.Brewly 20L Sparge Water Heater (SWH20):- High quality 304 grade stainless steel construction (matte or glossy)- Stainless steel lid- Stainless steel ball valve outlet 1/2" (fits 12mm hose inner diameter)- Heavy duty handles for safe lifting- 20L total capacity up to brim- Internal volume scale up to 17L- Concealed 2500W electric heating element for easy cleaning- Precise electronic temperature control via display, +/- 1°C- Thermostat setting 30-110°C (110°C for max output).- 2500 W heating element for quick heating- Automatic overtemp cutout and overheat protection for max safety- 230V power supply. EU-version power cord (UK power cord NOT included).- Height: 50 cm (without lid)- Diameter: 27 cm (without tap and handles)

Brewly 40L Sparge Water Heater is a 2500W thermostat controlled heater for quick heating of sparge water - HLT (Hot Liquor Tank). This sparge water heater has the same ball valve tap as the Brewly Breweries, a stainless steel quality product.Brewly 40L Sparge Water Heater (SWH40):- High quality 304 grade stainless steel construction- Stainless steel lid- Stainless steel ball valve outlet- Heavy duty handles for safe lifting- 40L total capacity up to brim- Internal volume scale up to 35L- Concealed 2500W electric heating element for easy cleaning- Precise electronic temperature control via display, +/- 1°C- Thermostat setting 30-110°C (110°C for max output).- 2000 W heating element for quick heating- Automatic overtemp cutout and overheat protection for max safety- 230V power supply. EU-version power cord (UK power cord NOT included).- Needs 13-16A fuse.

Experience precise, fast heating with the PowerBoil 25 Sparge Water Heater. Built for efficiency, this 2500-watt Heating Element heats up to 22 litres swiftly, providing perfectly tempered sparge water to maximise sugar extraction and improve brewing consistency. Its durable stainless steel design, 1/2" ball valve for easy connections, and keep-warm function make it an essential for serious brewers aiming to get the most out of every batch. Capacity: Warm up 22 litres, with a total capacity of 25 Liters. Heating Element:2500 watts Temperature Range:30–110 °C Construction:Stainless steel with tempered glass lid Maintain Temperature: Precise temperature adjustment with keep-warm feature The PowerBoil 25 Sparge Water Heater – for precise and fast heating of your sparge water!Boost your brewing with the PowerBoil 25, from Brewolution, a high-performance sparge water heater designed to deliver precision and efficiency at every stage. With a generous 22-litre heating capacity, the PowerBoil 25 ensures you always have ample sparge water ready, optimising your brewing process and improving consistency. Equipped with a powerful 2500-watt heating element, the PowerBoil 25 brings water to the ideal sparge temperature swiftly, giving you seamless control while saving valuable time on brew day. Whether you’re preparing for a large batch or a quick top-up, the PowerBoil 25 ensures sparge water is at the perfect temperature to maximise sugar extraction. The 1/2” stainless steel ball valve with a 13mm nozzle allows for quick, secure connections to tubing or pumps, making sparge water management effortless. The correct amount of hot sparge water at the right temperature is crucial for maximising efficiency, enhancing extraction, and achieving a higher yield. By properly rinsing the grain with optimally heated sparge water after mashing, you’re able to extract more sugars, resulting in a cleaner, more consistent flavour. Designed to meet the demands of every brewer, this PowerBoil sparge water heater ensures you get the most out of every ingredient, making each brew more efficient and enjoyable.  Technical Specifications:- Capacity: Warm up 22 litres, with a total capacity of 25 Liters.- Heating Element: 2500 watts- Temperature Range: 30–110 °C- Construction: Stainless steel with tempered glass lid- Valve: 1/2" stainless steel ball valve with a 13mm nozzle- Indicator lights: Red light heating. Green keep-warm function- Maintain Temperature: Temperature control and keep-warm function

Experience precise, fast heating with the PowerBoil 40 Sparge Water Heater. Built for efficiency, this 2500-watt Heating Element heats up to 35 litres swiftly, providing perfectly tempered sparge water to maximise sugar extraction and improve brewing consistency. Its durable stainless steel design, 1/2" ball valve for easy connections, and keep-warm function make it an essential for serious brewers aiming to get the most out of every batch. Capacity: Warm up 35 litres, with a total capacity of 40 Liters. Heating Element: 2500 watts Temperature Range: 30–110 °C Construction:Stainless steel with tempered glass lid Maintain Temperature: Precise temperature adjustment with keep-warm feature The PowerBoil 40 Sparge Water Heater – for precise and fast heating of your sparge water!Boost your brewing with the PowerBoil 40, from Brewolution, a high-performance sparge water heater designed to deliver precision and efficiency at every stage. With a generous 35-litre heating capacity, the PowerBoil 40 ensures you always have ample sparge water ready, optimising your brewing process and improving consistency. Equipped with a powerful 2500-watt heating element, the PowerBoil 40 brings water to the ideal sparge temperature swiftly, giving you seamless control while saving valuable time on brew day. Whether you’re preparing for a large batch or a quick top-up, the PowerBoil 40 ensures sparge water is at the perfect temperature to maximise sugar extraction. The 1/2” stainless steel ball valve with a 13mm nozzle allows for quick, secure connections to tubing or pumps, making sparge water management effortless. The correct amount of hot sparge water at the right temperature is crucial for maximising efficiency, enhancing extraction, and achieving a higher yield. By properly rinsing the grain with optimally heated sparge water after mashing, you’re able to extract more sugars, resulting in a cleaner, more consistent flavour. Designed to meet the demands of every brewer, this PowerBoil sparge water heater ensures you get the most out of every ingredient, making each brew more efficient and enjoyable.  Technical Specifications:- Capacity: Warm up 35 litres, with a total capacity of 40 Liters.- Heating Element: 2500 watts- Temperature Range: 30–110 °C- Construction: Stainless steel with tempered glass lid- Valve: 1/2" stainless steel ball valve with a 13mm nozzle- Indicator lights: Red light heating. Green keep-warm function- Maintain Temperature: Temperature control and keep-warm function

Sparge water heater for 18L (net) volume, the Bulldog Sparger removes much of the problem of heating large volumes of water for the sparging process.Bulldog Sparger takes the effort out of the sparging process. With this unit, you can heat up to 18L of water to near boiling, all ready for use with the Bulldog Brewer when it is time for sparging.The Bulldog Sparger connects easily to your pump from the Brewer, simply move the pump over to the valve outlet of the Sparger and pump over the hot sparge water, leaving the other end in the top hole of the Brewer. The obvious advantage is that you can place both units on the floor, or on a table. No need to place the sparge water heater much higher than the Brewer, which is not really where you want 18L boiling water!Bulldog Sparger features- Superior quality 304 grade stainless steel construction- Stainless steel lid- Stainless steel ball valve outlet with QD coupling- Heavy duty handles for safe lifting- Concealed electric elements for easy cleaning- Precise electronic temperature control via display, +/- 1°C- Thermostat setting 30-110°C (110°C for max output).- Capacity 18L (net)- 1,6kW heating elements (EU and UK models)- Automatic overtemp cutout and overheat protection for max safety- 12 months "no quibble" repair policy- 230V power supply. EU-version power cord (UK power cord NOT included). Link to User's Manual

Coobra Water Boiler 16L. EU-version power cord (UK power cord NOT included).

Coobra Water Boiler 26L. EU-version power cord (UK power cord NOT included).

Digiboil 65L is a digital electric boiler for heating brewing and sparging water, or as a BIAB-kettle. Suitable for heating up to 60 liters of water. Switch on the heating of the sparge water at mash-in, and you'll know it will be ready to use when you need it for sparging. Once the set temperature is reached, the DigiBoil will hold that temperature autmatically.Clearly visible volume graduations in Litres and Gallons. Easily accessible display and power switches at the side of the kettle. The temperature is adjustable between 0°C and 140 °C, in increments of 1 °C.DigiBoil 65L Digital Turbo Boiler- Three built-in heating elements for easy cleaning- Adjustable effect in 7 steps: 0,5 kW to 3,5 kW- Stainless Steel tap with 13 mm hose barb and 1/2" BSP threaded fitting- Suitable as boiler, HLT (Hot Liquor Tank) and for BIAB-brewing- Can also be used for cooking Sous Vide- Capacity: 60 Liters- Power: 3.5 kW (heating elements 2 kW + 1 kW + 0.5 kW). EU-plug (UK plug is not included).- Weight: 13 kg- Height: 74 cm- Diameter: 42 cm

Digital Turbo Boiler 35L with barb tap and Glass lid. Digital display can be set from 0C and up to 140C, with 1C increments. Dual heating element. 500 W, 1900 W and 2400 W.The perfect electric boiler that can be set to a temperature from 0C to 140C via the digital display. Set the temperature scale to 78 degrees, and you have the right water temperature for Sparging.Perfect in size for those who brew from 25 to 50 liters, brew, or need 5 to 30 liters of sparge water.Heat control is controlled via push buttons with fixed settings for 500 watts, 1900 watts. When both buttons are activated at the same time = 2400 watts.Produced in high-gloss stainless steel (304) steel. With liter and gallon intervals in the boiler (accuracy: +/- 1 liter).35 L. Digital Turbo Boiler with tap with barb. Digital display can be set from 0C and up to 140C, with 1C increments. Dual heating element. 500 W, 1900 W and 2400 W.Stainless steel threaded tap with ½ ”hose holder with swiwel screw fitting, for draining water. The stainless steel threaded spigot provides many connection options for bottling that can be purchased.The exterior mounted handles provide a good grip for internal cleaning.The boiler has hidden heaters, which together with the high-gloss stainless steel make the boiler easy to clean.Connection of power: 220 - 240VFactc:Capacity 30 liters, total volume 35 liters5 to 30 liters of water for spargeMade of high-gloss stainless steel (304) steelExternal Dimensions: 29" H x 15" W (including handles)Internal Dimensions: 19.5" H x 11.75" W

The Sparge Water Heater is a temperature controlled urn that allows you to heat up to 18 L of water making the brewing process even easier by having the right amount of sparge water heated to the right temperature ready at the time of sparge.Start heating your sparge water when you begin the mash to ensure it is ready for when you need to sparge. Once water is at required temperature, it will hold that temperature until changed or turned off. Also comes with a sight glass, tap and heating lights. Grainfather Sparge Water Heater 18L- 18 L Capacity- Stainless Steel Body- 2 kw Element- Sight Glass (with 1 L graduations visible)- Tap- Temperature Control- Heating Lights (to indicate input temperature has been reached or is still being heated)- 220 - 240V. EU-version power cord (UK power cord NOT included).NOTE: Graduations on the scale are measured from the tap.

The 25L Sparge Water Heater is designed to be used with up to 40L brewing systems making it the perfect companion for the G40 or the G30 Brewing Systems. It reduces the time and effort of heating additional sparge water during your brew, making your brew days even easier.This temperature-controlled urn allows you to heat up to 25L (6.6 US Gal) of water in preparation to sparge. Simply start heating your sparge water when you begin the mash, to ensure that it is ready when you need to sparge. Add the right amount of water according to your recipe, set the desired temperature and once the water has reached the required temperature, it will hold that temperature until you need it.Grainfather Sparge Water Heater 25L304 grade stainless steel with a brushed finish25L capacity2600WHeats up to 25L (6.6 US Gal) of sparge water in approx. 50 minutesOne-piece structure for easy cleaningCool touch lid, with a twisted lock for safety purposesWater gauge indication with an easy-to-use ball valve tap for dispensing water45-110° variable thermostat to heat your water to the desired temperatureHeating lights to indicate when the temperature has been reached or still heatingConcealed heating element

The Sparge Water Heater 40 L is designed to be used with up to 70 L brewing systems. It reduces the time and effort of heating additional sparge water during your brew, making your large or small brew days even easier.The Sparge Water Heater allows you to heat up to 40 L (10.5 US Gal) of water in preparation to sparge. Simply start heating your sparge water when you begin the mash, to ensure that it is ready when you need to sparge. Add the right amount of water according to your recipe, set the desired temperature and once the water has reached the required temperature, it will hold that temperature until you need it.Grainfather Sparge Water Heater 40L304 grade stainless steel40 L capacity2300WHeats up to 40 L (10.6 US Gal) of sparge water in approx. 50 minutesEasy to use ball valve tap for dispensing waterThermostat to heat your water to the desired temperatureHeating lights to indicate when the temperature has been reachedSize:Height to top of lid = 640mmBody diameter = 330mmHandle to handle width = 400mm