Breweries

New model. German-made brewing system with integrated cooling jacket and water-resistant control unit with built-in WiFi and Bluetooth.The classic brewing system has just gotten even better. The new #Braumeister PLUS has a completely new control panel and several smart improvements in the construction. The controller now have a touch screen of 5 inches and is IP65 water resistant. The previously external Wifi-module has also been integrated together with support for Bluetooth. In addition to the possibility of controlling the brewery remotely, this also means that the firmware can be automatically updated at all times.The construction has been further improved through to the temperature sensor now being mounted in the middle bar. This means that the temperature is always measured from the middle of the malt bed instead of at the bottom as before. The malt pipe has now been given an extra pair of lifting bolts, meaning that the sparging can be done in three steps instead of two.The Braumeister's unique design where the wort is circulated up through the malt pipe instead of out of the brewery and then over the top of the malt bed creates a less compact malt bed which reduces the risk of it clogging. The sparge takes place smoothly by gradually lifting the malt pipe up onto the stand at the top of the kettle.Thanks to the jacketed kettle, you both get a more efficient boil from its insulating properties and can also cool the wort directly in the kettle without risking contamination from, for example, a cooling coil. The double valves (one at the bottom and one at the front) also allow you to safely leave particles and protein deposits on the bottom while you transfer the wort tothe fermenter. The valve in the bottom also makes cleaning much easier.The entire brewing can be programmed via the control panel with support for protein breaks, step mashing and alarms for hop additions. It is also possible to set the start of the program so that you can, for example, get home from work just in time for the mash-in.Heating coil: 2,000 W outputPump: 27 W - adjustable speedPower supply connection: 230 V (fuse protection min. 10 A)Control system: fully automatic brewing control (temperature, time, pump)Maximum malt quantity: 6 kgWeld-on double jacket for coolingConnectors to jacket 1" ET 2x inclusive Gardena connectorsAdditional outlet tap ¾" on tank bottomSize: 60 x 40 x 40 cmTransport weight (bulk weight): 76 kgWeight: 19 kg

New model. German-made fully automatic brewing system with integrated cooling jacket and water-resistant control unit with built-in WiFi and Bluetooth.The classic brewing system has just gotten even better. The new #Braumeister PLUS has a completely new control panel and several smart improvements in the construction. The controller now have a touch screen of 5 inches and is IP65 water resistant. The previously external Wifi-module has also been integrated together with support for Bluetooth. In addition to the possibility of controlling the brewery remotely, this also means that the firmware can be automatically updated at all times.The construction has been further improved through to the temperature sensor now being mounted in the middle bar. This means that the temperature is always measured from the middle of the malt bed instead of at the bottom as before. The malt pipe has now been given an extra pair of lifting bolts, meaning that the sparging can be done in three steps instead of two.The Braumeister's unique design where the wort is circulated up through the malt pipe instead of out of the brewery and then over the top of the malt bed creates a less compact malt bed which reduces the risk of it clogging. The sparge takes place smoothly by gradually lifting the malt pipe up onto the stand at the top of the kettle.Thanks to the jacketed kettle, you both get a more efficient boil from its insulating properties and can also cool the wort directly in the kettle without risking contamination from, for example, a cooling coil. The double valves (one at the bottom and one at the front) also allow you to safely leave particles and protein deposits on the bottom while you transfer the wort tothe fermenter. The valve in the bottom also makes cleaning much easier.The entire brewing can be programmed via the control panel with support for protein breaks, step mashing and alarms for hop additions. It is also possible to set the start of the program so that you can, for example, get home from work just in time for the mash-in.Heating coil: 3200 W outputPump: 27 W - adjustable speedPower supply connection: 230 V (fuse protection min. 16 A)Control system: fully automatic brewing control (temperature, time, pump)Maximum malt quantity: 13 kgWeld-on double jacket for coolingConnectors to jacket 1" ET 2x inclusive Gardena connectorsAdditional outlet tap ¾" on tank bottomSize: 70 x 50 x 50 cmTransport weight (bulk weight): 76 kgWeight: 30 kg

The Brew Kit 25L is the perfect complement to your automatic brewery - we've put together the things you need to start brewing. Just add bottles and Recipe Kits (ingredients).Brew Kit 25L contains:- 25-liter (30L max) fermenter with med tap och lid- 25-liter (30L max) fermenter with lid (no tap)- Fermenter air lock- Bottle filler (fits the fermenter tap)- Automatic pump siphon 44cm (Note: without holder and clamp)- Bench Capper Better Brew- Mash Paddle 52cm- Thermometer- Bottle Washer Spin Mini- SanitizerNote: Does not contain bottles or ingredients.

Bulldog Master Brewey Kit with Bulldog Master Brewer 30L and Bulldog Sparger 18L!

The Bulldog Brewer has evolved into the Bulldog Master Brewer. It is a completely re-worked machine with many added advanced features and improvements. This amazing marvel of a beer making machine is available in all major European home brew outlets from February 2018. You can now be your own master micro brewer and create a wealth of interesting beer types from grains, hops and water and of course some beer yeast.There are similar products on the market today, but with a hefty price tag making them out of reach for most home brewers. We have gone to great length to develop a high quality, low price version with all the features you need and a few more actually.Start with crushed grain, then mash, lauter, sparge, boil and cool, all in the one high quality stainless steel unit. Gain full control over your brewing, from ingredients through to the final beer of any type or style. The options are limitless!MashingThe Bulldog Master Brewer comes with advanced automatic time and temperature control. Simply set your mashing temperature and rest time for up to 9 steps on the display, then let the Brewer to sort out the mashing for the steps while the pump slowly circulates the wort. It will turn itself off after the rest time, so no problem if you happen to forget it.LauteringAfter mashing, it is time for lautering (draining the malt bed).Just lift up the inner malt basket (the inner bucket with straining bottom) and fix it in the top position on the Brewer and let the wort drain into the body of the Brewer. You can program this in as a separate step, so you can continue the automatic program once you have handled the lautering manually.SpargingPre-heat enough water (according to your recipe) to rinse out the last goodies from the malt, by slowly pouring it over the malt bed, still with malt pipe in top position. Or buy the Bulldog Sparger which does the pre-heating for you. The Bulldog Sparger uses the pump from the Master Brewer so you don't need to place it higher than the Brewer. This is of course also a step in your full program, so the Brewer will tell you when to start this and when to stop.BoilingRemove the malt basket, use a Bulldog Hop Spider or similar strainer and add hops for the time you set in your program. The Brewer will beep to tell you when to do something. You can also use a boiling bag, but because that is restraining the hops more, you may need to increase the dose a little. Be careful during the boil, remember boiling wort it is VERY hot.CoolingFinally, connect up the spiral wort chiller to your cold water tap to rapidly cool your wort down to fermentation temperature, transfer to fermenter, pitch the yeast and that is it! One cool feature is that the Master Brewer handles negative steps as well. So if you create a last step "transfer to fermenter when cool enough", then the brewer will automatically monitor temp for you during cooling and let you know when you have reached your target temperature.Bulldog Master Brewer features- Superior quality 304 grade stainless steel construction- Double wall stainless boiler - you don't lose any heat!- Hardened glass lid so you can see what is happening- Heavy duty handles for safe lifting- Stainless steel ball valve outlet- Stainless steel Bazooka filter- Heavy duty magnetic drive pump- Full size malt basket for large grain bills (9 kgs max)- Detachable step mashing controller (9 steps)- Stainless steel malt basket with heavy duty fine bottom mesh- Concealed electric elements for easy cleaning- Precise electronic temperature control via display, +/- 1°C- Capacity (brewer) 30L (malt basket) 26L, finished beer 25L- 2.2kW heating elements, power settings adjusted via display- Full independent control of power, temperature and time for all steps- Stainless steel 12m spiral wort chiller with fittings for tap- Temperature monitoring with display during cooling- Automatic overtemp cutout and overheat protection for max safety- 12 months "no quibble" repair policy- 230V power supply. EU-version power cord (UK power cord NOT included)

This heat insulation jacket is designed to be used with the Grainfather to keep heat contained in the boiler and maintain a constant temperature during your brew during cooler times of the year.Grainfather Graincoat Features - Material - SBR Foam (7 mm thickness)- Designed for the Grainfather for heat insulation, especially in colder temperature areas.- Easy to wipe clean, polyurethane outer layer, and machine washable.

The Grainfather G30 Storage Bag is made of strong nylon that keeps your Grainfather free from dust and moisture from the environment.Just as it is important to clean your G30 between each brew, it is also good to store it safely.Put the bag on the floor, place your G30 on the bottom of the bag, thread it over and close.Height – 100cm (39”)Diameter – 45 cm (17”)Material – Synthetic (Nylon)

This High Performance Cleaner is specially formulated to be used with the Grainfather. It removes hard to clean proteins from your Grainfather without the need for tedious scrubbing. Perfect for cleaning hard to reach places such as the counter flow wort chiller, pipes and pumps.This is suitable for soft (copper) and hard (stainless steel) metals which not many other cleaners do. It is important you use this to clean your Grainfather as other cleaners may, over time, damage your system.Use- Add 2 Tbsp of cleaner to 15 L of water at 60°C to your Grainfather. - Attach the counter flow wort chiller and recirculate the cleaner for 15 minutes. - Remove the counter flow wort chiller and attach the recirculation pipe and recirculate for another 5 minutes. - Rinse all surfaces that came in contact with the cleaner thoroughly with winter. - Gently scrub the inside of the boiler with a soft bristle brush to remove left over stains. Rinse and drain.

Automation without removing the fun of brewing, be as involved as you want to be! More automation means you can multitask or simply relax while brewing and then be alerted when to return for your next step.Use the Connect Control Box in conjunction with the Connect App (and the recipe creator) for the ultimate brewing experience.Control Box Features:Bluetooth connection to your mobile device so it can be controlled remotely PID algorithm works in conjunction with a triac for more stable heating and so you can control power outputProgrammable step mashingDelayed heating - fill your Grainfather with water the night before and wake up to your water at strike temperature ready for brewing straight awayChange between celsius and fahrenheit easilyWaterproof graphic displayLugs at rear which can be changed to suit any Grainfather currently on the marketUse in manual mode or with appApp Features:Grainfather Grain Kit recipes provided in appImport Beer XML files Set your own boil temperature (for different altitudes)Change between celsius and fahrenheit easilyGrainfather calculators provided in appOnline recipe creator - create, share, rate and review brews through this central hub. Then when ready, sync with your app.

Perfect for small batch brewing, where you can test different beer styles or recipes and have more varieties of beer on the go. The Micro Pipework is perfect for brewing 10 L beers, or standard batches of a lower ABV beer with a small grain bill. Use this pipework when you are brewing with 2 kg - 4 kg of grain. Made in 304 Stainless steel.

Grainfather Overflow Inlet 36.

Grainfather Overflow Nut 43

This Hop Spider keeps hops together during the boil. It can be used on all appropriate sized boil pots, including the Grainfather. Made with a coarser, 800 micron mesh, for maximum wort flow and increased hop utilisation. This spider can be used for any kind of hops, including hop pellets.Although it is not a necessity in brewing with the Grainfather brewing system, it is a popular product. This has therefore been designed with a specifically fitted hook design which can be hooked onto the side of any brew pot or the Grainfather support ring. Perfect for those of you who would like the reassurance of a hop spider when brewing. Mangrove Jack's Hop Spider (Grainfather)Diameter: 15 cm Length: 30 cm Material: 800 micron 304 grade stainless steel mesh, with stainless steel support band and single hook

Hop Spider with fine stainless steel mesh to keep hops separated from the wort during the boil.InfoMaterial: 304 stainless steelMesh size: 300 micronsTotal length: 46cmLength of mesh basket: 35cmDiameter top: 15cmDiameter bottom: 10cm

The Grainfather Conical Fermenter Pro Cooling Edition allows you to control the heating of your unit, dump yeast, take samples and transfer your wort via our innovative dual function valve design. Note: EU-version power cord (UK power cord NOT included).The Cooling Pump Kit allows users of the Grainfather Conical Fermenter to control the fermentation temperature with cold water by pumping it through the double walled insulated interior.Ferment like never before! The Grainfather Conical Fermenter give the brewer professional fermentation control, just like the commercial breweries. Fermentation is arguably the most important part of producing a good quality beer. A good fermentation environment starts with a clean and sterile fermenter, has a consistent controlled temperature base and exposure to oxygen is minimised. The Grainfather Conical Fermenter provides you with a modular system for all of this and more!FEATURES:Double Walled: A stainless steel double walled skin is filled with a thick layer of polyurethane foam for insulation. This is what keeps the wort at a constant stable temperature with minimal influence from any external environmental temperature changes, providing insulation for your fermentation that a standard jacket cannot achieve. Integrated Gentle Heating: In the cavity of the fermenter between the outer body and cone sits a 30 Watt, 12V heating element. Unlike standard heating elements/sources that directly heat the liquid, this heat source is designed to heat the environment in between the walls of the fermenter, which in turn heats the liquid. It is similar to controlling the temperature in a temperature controlled room. The fermenter acts as an artificial environment which can be heated, meaning the temperature is raised in an even and controlled manner which is much better for the yeast. Integrated Cooling Sleeve: In between the two stainless steel walls sits a cooling sleeve (also made of stainless steel). This cooling sleeve is welded onto the inner wall of the fermenter and can be hooked up to the Cooling Pump Kit. Temperature is dialed into the Temperature Controller and as the iced cold water travels through this sleeve, it cools the stainless steel which in turn evenly cools the beer in the fermenter. The cooling sleeve never comes into contact with the beer, it is completely concealed, built into the fermenter and never needs cleaning or sanitising - a true innovation for a fermenter of this scale.Basic Cooling Pump Kit: The Cooling Pump Kit allows users of the Grainfather Conical Fermenter to control the fermentation temperature with cold water by pumping it through the double walled insulated interior.Easy Access to the Interior for Hassle Free Cleaning: The Grainfather Conical Fermenter has a smooth interior with no additions such as cooling coils or additional sampling valves meaning it is easy to clean and minimises the risk of infection.Golden Angle Conical:The conical shape of the fermenter is typical for professional breweries. Our conical has been designed with the 'Golden Angle' of 60º. This is the optimum angle for yeast and sediment to drop down to the bottom of the cone without getting stuck to the sides, allowing you to transfer from above the sediment line, resulting in clearer beer. The conical shape also allows for better mixing during fermentation due to the path of convention currents that it enables to occur. Dual Valve Tap: Make the yeast dumping, transferring and sampling process more professional with this innovative all in one valve. Sampling and transferring is done through an inlet above the sediment line, allowing for clear, sediment free beer. Easily collect your yeast from below the sediment line with the same unique valve for recultivating and pitching. The innovative design of the valve allows for this dual functionality and less cleaning for you. Temperature Control: The Temperature Controller easily snaps on via magnets and pogo pins. Allowing you to accurately dial in a temperature and even set a temperature schedule/profile (you can set up to 4 profiles each with 5 stages). It can control the heating of the integrated heating element and the cooling via the Cool Pump Kit. Support: The Grainfather Conical Fermenter is fully supported around the world by a fantastic support team who love brewing just as much as you do. Our support team is here for any technical enquiries on brewing or how the Conical Fermenter works, as well as general customer service enquiries.

 All Grainfather Conical Fermenters come with a 24 month warranty. EU-power plug (UK-plug not included)

The Grainfather Conical Fermenter Pro Edition allows you to control the heating of your unit (and cooling with the Glycol Chiller available separately), dump yeast, take samples and transfer your wort via our innovative dual function valve design. Note: EU-version power cord (UK power cord NOT included).Ferment like never before! The Grainfather Conical Fermenter give the brewer professional fermentation control, just like the commercial breweries. Fermentation is arguably the most important part of producing a good quality beer. A good fermentation environment starts with a clean and sterile fermenter, has a consistent controlled temperature base and exposure to oxygen is minimised. The Grainfather Conical Fermenter provides you with a modular system for all of this and more!FEATURESDouble Walled: A stainless steel double walled skin is filled with a thick layer of polyurethane foam for insulation. This is what keeps the wort at a constant stable temperature with minimal influence from any external environmental temperature changes, providing insulation for your fermentation that a standard jacket cannot achieve. Integrated Gentle Heating: In the cavity of the fermenter between the outer body and cone sits a 30 Watt, 12V heating element. Unlike standard heating elements/sources that directly heat the liquid, this heat source is designed to heat the environment in between the walls of the fermenter, which in turn heats the liquid. It is similar to controlling the temperature in a temperature controlled room. The fermenter acts as an artificial environment which can be heated, meaning the temperature is raised in an even and controlled manner which is much better for the yeast. Integrated Cooling Sleeve: In between the two stainless steel walls sits a cooling sleeve (also made of stainless steel). This cooling sleeve is welded onto the inner wall of the fermenter and can be hooked up to the additionally purchased Glycol Chiller. Temperature is dialed into the Temperature Controller and as the cooling liquid travels through this sleeve, it cools the stainless steel which in turn evenly cools the beer in the fermenter. The cooling sleeve never comes into contact with the beer, it is completely concealed, built into the fermenter and never needs cleaning or sanitising - a true innovation for a fermenter of this scale.Easy Access to the Interior for Hassle Free Cleaning: The Grainfather Conical Fermenter has a smooth interior with no additions such as cooling coils or additional sampling valves meaning it is easy to clean and minimises the risk of infection.Golden Angle Conical:The conical shape of the fermenter is typical for professional breweries. Our conical has been designed with the 'Golden Angle' of 60º. This is the optimum angle for yeast and sediment to drop down to the bottom of the cone without getting stuck to the sides, allowing you to transfer from above the sediment line, resulting in clearer beer. The conical shape also allows for better mixing during fermentation due to the path of convention currents that it enables to occur. Dual Valve Tap: Make the yeast dumping, transferring and sampling process more professional with this innovative all in one valve. Sampling and transferring is done through an inlet above the sediment line, allowing for clear, sediment free beer. Easily collect your yeast from below the sediment line with the same unique valve for recultivating and pitching. The innovative design of the valve allows for this dual functionality and less cleaning for you. Temperature Control: The Temperature Controller easily snaps on via magnets and pogo pins. Allowing you to accurately dial in a temperature and even set a temperature schedule/profile (you can set up to 4 profiles each with 5 stages). It can control the heating of the integrated heating element and the cooling (if you have upgrade to the Glycol Chiller). Support: The Grainfather Conical Fermenter is fully supported around the world by a fantastic support team who love brewing just as much as you do. Our support team is here for any technical enquiries on brewing or how the Conical Fermenter works, as well as general customer service enquiries.

 All Grainfather Conical Fermenters come with a 24 month warranty. EU-power plug (UK-plug not included)

Temperature control is one of the most crucial elements for producing a good quality beer. It needs to be regulated and stable throughout the whole fermentation process to ensure the yeast doesn't get stressed and ferments correctly to get the right flavour profile. The pump can handle cold water and glycol.To be able to cool with the Grainfather Conical Fermenter, you need to have the Conical Fermenter Temperature Controller. Then once your target temperature is below the temperature of the wort in your fermenter the Cooling Pump Kit pumps ice cold water or Glycol through the double walled insulated interior to cool down your wort. Simply connect the couplers and insulated hoses to the Conical Fermenter, submerge the submersible pump into a cooler box with water (add ice for your required temperature) and pump the liquid through the insulated cooling sleeve of the Conical Fermenter body.- Conical Fermenter Cooling Pump (submersible) that can handle Glycol.- T-section power connector.- 2 x brass couplers.- Rated 12 VDC – 4.8 Watts.

All you need is a C02 bottle and a regulator to attach to the Pressure Transfer and you can transfer your beer into a keg or bottles through the Conical Fermenter Dual Valve Tap or via the top of the fermenter lid using the Beer Racking Pipe.Package includes- High quality 304 stainless steel components- Accurate digital pressure gauge- Needle valve for precise control of pressureNOTE: Batteries are not included for the Pressure Gauge. 2 x AAA batteries are needed.

New version with touch panel (LED). Control your fermentation temperature accurately, every time! Temperature control is one of the most crucial elements for producing a good quality beer. It needs to be regulated and stable throughout the whole fermentation process to ensure the yeast doesn't get stressed and ferments correctly to get the right flavour profile. With the ability to individually power and control the temperature of up to four Grainfather Conical Fermenters, each with their own fermenting schedules, the Grainfather Glycol Chiller is the perfect addition to ensure superior fermenting results.Design:With a sleek and compact design, that still accommodates our full array of features, the Glycol Chiller maintains the Grainfather’s principle of providing quality home brewing equipment, that deliver’s craft brewery like results, on a small footprint. With the addition of the Glycol Chiller, your system is operating at the ultimate level and you are even able to cold crash and lager down to 4°C (39°F). The Glycol Chiller connects to a hidden cooling sleeve, located in between the two stainless steel walls of the Conical Fermenter. Your desired temperature is dialed into the digital temperature controller on the Conical Fermenter, the liquid then travels through this sleeve, cooling the stainless steel which in turn cools the beer in the fermenter. The cooling sleeve never comes into contact with the beer, is completely concealed and does not need cleaning or sanitising - a true innovation for a fermenter on this scale.Features:- Allows you to cold crash 23 L (6 US Gal) of wort to as low as 4-6ºC (39-43°F). Minimum temperature will vary based on external factors such as ambient room temperature, the number of fermenters connected and other environmental conditions.- Cools and powers up to 4 Conical Fermenters at different temperatures and fermenting schedules.Note: The instructions for the Glycol Chiller will be attached to the outside of the shipping box. It is important that you retain these, do not throw them away and read them carefully before use to ensure no damage occurs to the unit. If these for any reason are not included with your purchase, we highly recommend you download a new copy via the instructions tab on this page and read them carefully.Glycol Chiller includes:- Wall outlet power cord with plug- 2 x cooling connection couplers- 2 x 2 m (6.5 ft) insulated hoses- 1 x Glycol Funnel- 1 x silicon tube for priming pump- 1 x 3 L (3 US qt) propylene glycolNOTE: When you receive your unit, you will need to fill it up with a propylene glycol mixture. Refer to the instructions provided with the Glycol Chiller for mixing, filling and pump priming information.Warranty:There is 24 month warranty for Glycol Chillers. Specifications:- Touch LED display panel- 6 L (1.5 US Gal) glycol tank- 300 W- 220 – 240 V, 50Hz- Noise level (operating): 50-60 dB- EU-version power cord (UK power cord NOT included).- 390W x 450D x 656H (mm)- Weight: 28.3 kg (62 lbs)InstructionsClick here to open the manual

The Grainfather Digital Temperature Controller replaces the temperature display. With this you can control the heating and the cooling (if you have the Grainfather Glycol Chiller) of your fermenter by dialing in a temperature or even setting a temperature schedule (can set up to 5 stages). This snaps on easily via magnets and pogo pins with no extra cords or clutter.Control the heating element and Glycol Chiller (available separately)Choose between imperial and metric (C° & F°)Total of 4 fermentation profiles with up to 5 steps each (2 are pre-set for a lager and an ale, 2 are custom)Hysteresis is customisable and able to be set at 0.1 intervals between a range of 0.1°C – 1.9°C & 0.2°F - 2.9°F (the default setting is 0.5°C)

Make the yeast dumping, transferring and sampling process more professional with this innovative all in one valve. Sampling and transferring is done through a valve above the sediment line, allowing for clear, sediment free beer. Collect your yeast from below the sediment line for recultivating and pitching. - Dual Valve Tap with 110 mm (4.3”) liquid inlet

A great solution for taking 2 liters of beer from your keg to wherever you need to go, be it inside or to the party or simply to the other side of the room! Made from high grade stainless steel, and insulated to keep your beer chilled.- 304 grade stainless steel - Double walled with vacuum insulation- Flip top lid- 2L capacityHeight: 30 cm Diameter: 13,5 cmOpening: 52 mm

Mash Grid 255mm

Bazooka T-Screen 2x15cm

Bazooka Screen 15cm/6"

Bazooka Screen 30cm/12"

Grainfather Bottom Overflow Pipe 40.

Grainfather Top/Bottom Plate Silicone Seal 37/41.

Grainfather Top Overflow Pipe 39.

Powerful and quiet 19L/min magnetic pump capable of handling water/wort up to 140°C. Perfect for recirculating wort or drinking water. Plastic Head.Do not run the pump dry.Specifications Magnetic Pump MP-15RMCapacity: max 19 L/min (60Hz)Head: max 3,4 meters (60Hz)Power rating: 10WConnections: 1/2" threaded males on both input and outputVoltage: 220-240V (50-60Hz)Protection: Class BPower cable: C13-plug (EU-version power cord (UK power cord NOT included))Note: Do not run the pump dry

Brewster Hop Spider with fine stainless steel mesh to keep hops separated from the wort during the boil.InfoMaterial: 304 stainless steelMesh size: 310 micronsTotal height: 38 cmCylinder height: 36 cmDiameter opening: 15 cmDiameter bottom: 10 cm

Coobra CB3 PRO, latest version, is a complete 30L recircularing (RIMS) brewery with 11-step mashing digital controller and 10 recipe memory. New powerful 220V-pump. Gardena-attachments on the cooling spiral, and a whirlpool function. You mash, sparge, boil and cool in the same brewery. With cooling wort spiral.Coobra CB3 PRO v5 Brewery• Produkt: Coobra Craft Brewer 3 PRO• Model No.: CB3 PRO• Capacity: Outer pot (32.7L)• Outer pot 35L with brushed surface with 10/15/20/25/30 L water scale on the body, inner filter pot 26L with 2mm diameter hole filter, inner filter pot can be hanged on or put in the outer urn for brewing the mash• 304 stainless steel top cover & heating base, 0.5mm thick outer urn & 0.4mm thick inner filter pot, 201 SS bottom plate cover• Direct water temperature sensor shows the actural water temperature ±1℃ and start from 30℃• PCB controls two heating elements: 1500W/1000W• Movable digital display screen manually controls optional power.• Air grids are made for ventilation of the heating area• Build in 220V pump is for circulating the wort with on/off switch control.• PCB supplys 220V to the pump• Tempered glass lid• Patent anti burning system• Strong metal handles for safety carry• Non-trip 304 stainless steel water tap with the strainer• 304 stainless steel wort chiller with 12mm diameter• Auto overtemp cutout and overheat proctection for safety and reliable use• Replaceable element makes unit easy to clean.• Visiable power cord length is not less than 1.3M• The screen plate distributes the wort, reduces risk of mash channeling andincreases brew efficiency.• Voltage: 220V~240V / 50~60Hz• Max power 2500W±5%• Size: Ø 30 x 63 cm• Weight: 6.20kg• Box size: tbd

Powerful and quiet 19L/min magnetic pump capable of handling water/wort up to 140°C. Perfect for recirculating wort or drinking water. Stainless Steel Head.Do not run the pump dry.Specifications Magnetic Pump MP-15RM Stainless Steel HeadCapacity: max 19 L/min (60Hz)Head: max 3,4 meters (60Hz)Power rating: 10WConnections: 1/2" BSP threaded males on both input and outputVoltage: 220-240V (50-60Hz)Protection: Class BPower cable: C13-plug (EU-version power cord (UK power cord NOT included))Note: Do not run the pump dry

Coobra CB5 PRO, latest version 5, is a complete 50L recircularing (RIMS) brewery with 11-step mashing digital controller and 10 recipe memory. New powerful 220V-pump. Gardena-attachments on the cooling spiral, and a whirlpool function. You mash, sparge, boil and cool in the same brewery. With cooling wort spiral.Coobra Craft Brewer 5 PRO v5• Model No.: CB5 PRO• Capacity: Outer pot (48L)• Inner pot (31L)• Outer pot 48L with brushed surface with 10/15/20/25/30 L water scale onthe body, inner filter pot 31L with 2mm diameter hole filter, inner filter potcan be hanged on or put in the outer urn for brewing the mash• 304 stainless steel top cover & heating base, 0.5mm thick outer urn &0.4mm thick inner filter pot, 201 SS bottom plate cover• Direct water temperature sensor shows the actural water temperature±1°C and start from 30°C• Whirlpool function• PCB controls two heating elements: 1500W/1800W• Movable digital display screen manually controls optional power.• Air grids are made for ventilation of the heating area• Build in 220V pump is for circulating the wort with on/off switch control.• PCB supplys 220V to the pump• Tempered glass lid• Patent anti burning system• Strong metal handles for safety carry• Non-trip 304 stainless steel water tap with the strainer• 304 stainless steel wort chiller with 12mm diameter• Auto overtemp cutout and overheat proctection for safety and reliable use• Replaceable element makes unit easy to clean.• Visiable power cord length is not less than 1.3M• The screen plate distributes the wort, reduces risk of mash channelingandincreases brew efficiency.• Voltage: 220V~240V / 50~60Hz• Max power 3300W±5%• Box size: tbd

New Version 5! Bewery Kit with Coobra CB3 PRO and Coobra 16L sparge water heater. Coobra CB3 PRO, latest version. is a complete 30L recircularing (RIMS) brewery with 11-step mashing digital controller and 10 recipe memory. New powerful 220V-pump. Gardena-attachments on the cooling spiral, and a whirlpool function. You mash, sparge, boil and cool in the same brewery. With cooling wort spiral.Coobra CB3 PRO Brewery• Produkt: Coobra Craft Brewer 3 PRO• Model No.: CB3 PRO• Capacity: Outer pot (32.7L)• Outer pot 35L with brushed surface with 10/15/20/25/30 L water scale on the body, inner filter pot 26L with 2mm diameter hole filter, inner filter pot can be hanged on or put in the outer urn for brewing the mash• 304 stainless steel top cover & heating base, 0.5mm thick outer urn & 0.4mm thick inner filter pot, 201 SS bottom plate cover• Direct water temperature sensor shows the actural water temperature ±1℃ and start from 30℃• PCB controls two heating elements: 1500W/1000W• Movable digital display screen manually controls optional power.• Air grids are made for ventilation of the heating area• Build in 220V pump is for circulating the wort with on/off switch control.• PCB supplys 220V to the pump• Tempered glass lid• Patent anti burning system• Strong metal handles for safety carry• Non-trip 304 stainless steel water tap with the strainer• 304 stainless steel wort chiller with 12mm diameter• Auto overtemp cutout and overheat proctection for safety and reliable use• Replaceable element makes unit easy to clean.• Visiable power cord length is not less than 1.3M• The screen plate distributes the wort, reduces risk of mash channeling andincreases brew efficiency.• Voltage: 220V~240V / 50~60Hz• Max power 2500W±5%• Size: Ø 30 x 63 cm• Weight: 6.20kg• Box size: tbd

Brewery Kit with Coobra CB5 PRO 50L and Coobra 16L sparge water heater. Coobra CB5 PRO, latest version, is a complete 50L recircularing (RIMS) brewery with 11-step mashing digital controller and 10 recipe memory. New powerful 220V-pump. Gardena-attachments on the cooling spiral, and a whirlpool function. You mash, sparge, boil and cool in the same brewery. With cooling wort spiral.Coobra Craft Brewer 5 PRO• Model No.: CB5 PRO• Capacity: Outer pot (48L)• Inner pot (31L)• Outer pot 48L with brushed surface with 10/15/20/25/30 L water scale onthe body, inner filter pot 31L with 2mm diameter hole filter, inner filter potcan be hanged on or put in the outer urn for brewing the mash• 304 stainless steel top cover & heating base, 0.5mm thick outer urn &0.4mm thick inner filter pot, 201 SS bottom plate cover• Direct water temperature sensor shows the actural water temperature±1°C and start from 30°C• Whirlpool function• PCB controls two heating elements: 1500W/1800W• Movable digital display screen manually controls optional power.• Air grids are made for ventilation of the heating area• Build in 220V pump is for circulating the wort with on/off switch control.• PCB supplys 220V to the pump• Tempered glass lid• Patent anti burning system• Strong metal handles for safety carry• Non-trip 304 stainless steel water tap with the strainer• 304 stainless steel wort chiller with 12mm diameter• Auto overtemp cutout and overheat proctection for safety and reliable use• Replaceable element makes unit easy to clean.• Visiable power cord length is not less than 1.3M• The screen plate distributes the wort, reduces risk of mash channelingandincreases brew efficiency.• Voltage: 220V~240V / 50~60Hz• Max power 3300W±5%• Box size: tbd

Make your brew system, fermentor or other equipment mobile. Useful on the brew day. 4 robust rubber wheels, 2 of them can be locked.Maximum load: 200 kg.Measurement: 57 x 57cm

BrewZilla Generation 4 is the latest evolution in this series of RIMS breweries and has now become more flexible and powerful than ever. Although the exterior shape is largely the same, almost everything on the inside has been redesigned. The two big news are the new control unit with WiFi and Bluetooth as well as the concave bottom with built-in heating elements that implement Ultra Low Watt Density.The brewing process is still similar where you mash, leach and boil in the same vessel and the accompanying cooling coil means you can also cool the wort after boiling. During mashing, the wort is pumped around over the malt bed and then strained off and leached by lifting the malt basket up and placing it on the edge at the top of the pot.BrewZilla 35L Gen 4 RAPT Brewery Specifications:- Stainless construction- Detachable control unit with WiFi and Bluetooth connectivity- Programmable mash schedule with up to 6 steps- Ultra Low Watt Density heating element 2400 W- Malt barrel with removable bottom and feet in two levels for leaching- Stainless cooling coil with 13 mm in diameter- Volume graded pot- Magnetic pump at the bottom connected to ball valve and recirculation arm- Two upper and one lower handles for easier cleaning and handling- Brew volume max: 35 l- Maximum amount of malt: 11.5 kg- Height with recirculation arm mounted: 832 mm- Diameter: 318 mmComplete Concave Draining BaseThe new base design completely drains out meaning you capture every single bit of wort. No longer do you need to tilt the brewery to extract every last bit of wort. This also makes it suitable for CIP cleaning using our new Low Volume CIP Spray Rotor (KL04329).False Bottom Pump Protection ScreenOne of the key features of all the BrewZilla single vessel units is the false bottom protection screen. This screen avoids the need for doing a whirlpool and it filters wort and prevents more than 95% of hops and hot break getting sucked into the pump and thus greatly reduces the blocked pump issues that are often an issue with other brewery designs.Ultra Low Watt DensityThe BrewZilla has signficantly lower watt density than other breweries. The main benefit of lower watt densities are that it enables you to produce lighter colours of beers that would otherwise get some caramelisation. The ultra low watt density also means you have less chance of boil overs, you get less crud sticking to the element making cleaning easier and ultimately reduces wear and tear on the element meaning even with significant abuse your elements will last way longer.RAPT/Wifi ConnectedThe new Gen 4 model is the first BrewZilla that connects to the RAPT Portal (https://app.rapt.io/). This portal allows you to track, record and monitor your brews online. This greatly reduces the need for handwritten records of your brew day as it's all done automatically. The RAPT portal also allows you to see every brew you have done in the past and control the brewery remotely so you can start pre-heating water remotely or simply keep an eye on the brewing process while you do something else. Get push notifications to your mobile phone of when to add hops or start the boil. Along with this ease of access and control. The RAPT BrewZilla will also allow you to fully customise your brewday with profiles specifically tuned to your style of brewing or your recipe.For example you could set up your profile to receive certain alarms or messages when you are required to do something. E.g. Adding grain when the strike temperature is reached. Mash-Out Alarm when you're ready to sparge, Salt / Hop additions when you've reached the boil. As well as hop stand additions or chilling instructions. All of this at the touch of a button that is preprogrammed to what you want to do. No more egg timers, no more phone timers. Everything controlled by the one area.Bluetooth Gateway DeviceKegLand is currently developing various bluetooth devices such as KL24334 RAPT Bluetooth Thermometer (low energy BLE) other sensors which will be compatible with this brewery. This brewery is able to receive the BLE beacons and relay this information onto the RAPT portal. Also by receiving multiple BLE thermometer sensors the Brewery is able to make smater and more automated decisions on how to control the brewing or distillilation process. For example a BLE thermometer can be placed into your coolant water so you get an alarm if the temperature is too high, a BLE thermometer can be put into the middle of the malt pipe so you can more accurately control elements switching on/off to achieve a core malt pipe temperature etc.Improved Base Design with Easy Access PumpThe new base design means we have sealed all the electronics on the underside of the brewery into a separate junction box. This has allowed us to omit the bottom cover. This significant design change means that the pump can be accessed much more easily. It also means the plumbing can be changed more easily too. For instance you can re-arrange the plumping to the pump to pump into the tap outlet or change this so the tap outlet bypasses the pump. These changes make it more flexible but also much easier to take apart the pump for cleaning and maintenance if required.RAPT Controller with Full Colour ScreenThe new RAPT controller has an easy to read full colour screen. The controller can also be disconnected easily making wash down easier. The controller is mounted in a higher position with a tilting frame so you can angle the screen toward you depending on how tall you are. The new controller module is packed with features and KegLand is consistently updating firmware to include more features. Firmware updates are quick and painless and with a single click you can upgrade all Gen 4 units to the latest firmware to take advantage of new features and accessories. Forget getting on your knees mid-brew, do it all while standing or sitting next to your BrewZilla.The controller can also activate the pump. Meaning there are no toggle switches anywhere on the BrewZilla Gen 4.IEC Cable for Easy StorageThe new design has a removable IEC cable so you can unplug the cable making it more neat for storage.Improved Lid HandlesThe new lid handles are better designed and made from stainless so they are more robust and more ergonomic to hold especially with wet hands.Two Stage Oversized Malt PipeThis new malt pipe design is 30% larger meaning you can mash more grains and either make more beer or make higher gravity beers. the new malt pipe also has a two stage height adjustment so you hand half lift the malt pipe and set on the supporting halo ring halfway up. This makes it more ergonomical so you can lift the heavy malt pipe up in two stages but has the second advantage that it makes the brewery more suitable for smaller batches too where raising the malt pipe half way up is preferable.

BrewZilla Generation 4 is the latest evolution in this series of RIMS breweries and has now become more flexible and powerful than ever. Although the exterior shape is largely the same, almost everything on the inside has been redesigned. The two big news are the new control unit with WiFi and Bluetooth as well as the concave bottom with built-in heating elements that implement Ultra Low Watt Density.The brewing process is still similar where you mash, leach and boil in the same vessel and the accompanying cooling coil means you can also cool the wort after boiling. During mashing, the wort is pumped around over the malt bed and then strained off and leached by lifting the malt basket up and placing it on the edge at the top of the pot.BrewZilla 35L Gen 4 RAPT Brewery Specifications:- Stainless construction- Detachable control unit with WiFi and Bluetooth connectivity- Programmable mash schedule with up to 6 steps- Ultra Low Watt Density heating element 3500 W- Malt barrel with removable bottom and feet in two levels for leaching- Stainless cooling coil- Volume graded pot- Magnetic pump at the bottom connected to ball valve and recirculation arm- Two upper and one lower handles for easier cleaning and handling- Brew volume max: 65 l- Maximum amount of malt: 18.5 kg- Height with recirculation arm mounted: 915 mm- Diameter: 406 mmComplete Concave Draining BaseThe new base design completely drains out meaning you capture every single bit of wort. No longer do you need to tilt the brewery to extract every last bit of wort. This also makes it suitable for CIP cleaning using our new Low Volume CIP Spray Rotor (KL04329).False Bottom Pump Protection ScreenOne of the key features of all the BrewZilla single vessel units is the false bottom protection screen. This screen avoids the need for doing a whirlpool and it filters wort and prevents more than 95% of hops and hot break getting sucked into the pump and thus greatly reduces the blocked pump issues that are often an issue with other brewery designs.Ultra Low Watt DensityThe BrewZilla has signficantly lower watt density than other breweries. The main benefit of lower watt densities are that it enables you to produce lighter colours of beers that would otherwise get some caramelisation. The ultra low watt density also means you have less chance of boil overs, you get less crud sticking to the element making cleaning easier and ultimately reduces wear and tear on the element meaning even with significant abuse your elements will last way longer.RAPT/Wifi ConnectedThe new Gen 4 model is the first BrewZilla that connects to the RAPT Portal (https://app.rapt.io/). This portal allows you to track, record and monitor your brews online. This greatly reduces the need for handwritten records of your brew day as it's all done automatically. The RAPT portal also allows you to see every brew you have done in the past and control the brewery remotely so you can start pre-heating water remotely or simply keep an eye on the brewing process while you do something else. Get push notifications to your mobile phone of when to add hops or start the boil. Along with this ease of access and control. The RAPT BrewZilla will also allow you to fully customise your brewday with profiles specifically tuned to your style of brewing or your recipe.For example you could set up your profile to receive certain alarms or messages when you are required to do something. E.g. Adding grain when the strike temperature is reached. Mash-Out Alarm when you're ready to sparge, Salt / Hop additions when you've reached the boil. As well as hop stand additions or chilling instructions. All of this at the touch of a button that is preprogrammed to what you want to do. No more egg timers, no more phone timers. Everything controlled by the one area.Bluetooth Gateway DeviceKegLand is currently developing various bluetooth devices such as KL24334 RAPT Bluetooth Thermometer (low energy BLE) other sensors which will be compatible with this brewery. This brewery is able to receive the BLE beacons and relay this information onto the RAPT portal. Also by receiving multiple BLE thermometer sensors the Brewery is able to make smater and more automated decisions on how to control the brewing or distillilation process. For example a BLE thermometer can be placed into your coolant water so you get an alarm if the temperature is too high, a BLE thermometer can be put into the middle of the malt pipe so you can more accurately control elements switching on/off to achieve a core malt pipe temperature etc.Improved Base Design with Easy Access PumpThe new base design means we have sealed all the electronics on the underside of the brewery into a separate junction box. This has allowed us to omit the bottom cover. This significant design change means that the pump can be accessed much more easily. It also means the plumbing can be changed more easily too. For instance you can re-arrange the plumping to the pump to pump into the tap outlet or change this so the tap outlet bypasses the pump. These changes make it more flexible but also much easier to take apart the pump for cleaning and maintenance if required.RAPT Controller with Full Colour ScreenThe new RAPT controller has an easy to read full colour screen. The controller can also be disconnected easily making wash down easier. The controller is mounted in a higher position with a tilting frame so you can angle the screen toward you depending on how tall you are. The new controller module is packed with features and KegLand is consistently updating firmware to include more features. Firmware updates are quick and painless and with a single click you can upgrade all Gen 4 units to the latest firmware to take advantage of new features and accessories. Forget getting on your knees mid-brew, do it all while standing or sitting next to your BrewZilla.The controller can also activate the pump. Meaning there are no toggle switches anywhere on the BrewZilla Gen 4.IEC Cable for Easy StorageThe new design has a removable IEC cable so you can unplug the cable making it more neat for storage.Improved Lid HandlesThe new lid handles are better designed and made from stainless so they are more robust and more ergonomic to hold especially with wet hands.Two Stage Oversized Malt PipeThis new malt pipe design is 30% larger meaning you can mash more grains and either make more beer or make higher gravity beers. the new malt pipe also has a two stage height adjustment so you hand half lift the malt pipe and set on the supporting halo ring halfway up. This makes it more ergonomical so you can lift the heavy malt pipe up in two stages but has the second advantage that it makes the brewery more suitable for smaller batches too where raising the malt pipe half way up is preferable.

Grain stopper for Grainfather G30 & Grainfather G70

Grainfather Magnetic Pump MP-10RN with C14 plug. Original. Standard 14mm input/output.

Plastic Head for Magnetic Pump MP-15RM (spare part).

The G30v3 is an all-grain brewing system with a 30L (8 US Gal) capacity, designed to make up to 40 pints (23L or 6 US Gal) of high-quality beer from one brew. With app integration, innovative features, and an intuitive design, it’s perfect for both beginner and experienced brewers.Features- Sleek 304 grade stainless steel body- Manage your brew day from your mobile device via Bluetooth using the Grainfather App- Get a more reliable connection between your G30v3 controller and the Grainfather App on your smartphone with the GCAST Bluetooth Wi-Fi Bridge- A robust magnetic drive pump for maximum brewing efficiencies- NEW perforated grain basket negates the need for a top plate or additional pipework (up to 9kg malt)- NEW auto reset switch avoids the need to get underneath the unit should an unexpected trip occur- Counter flow wort chiller which can cool wort to less than 20°C within approx 20-30 minutes.- Unlock distilling capabilities with the Still Spirits Alembic Dome & Condenser- Backed by a 3-year warranty- EU-version power cord (UK power cord NOT included).SIZE:685 x 386mm (27 x 15’’)WEIGHT:14.6kg (32lb)MAX PREBOIL VOLUME:30L (8 US Gal)BATCH VOLUME:Max: 25L (7 US Gal)Min: 10L (3 US Gal) GRAIN BILL:Max: 8kg (18lb)*Min: 1.5kg (3.3lb)*9kg (20lb) with top plate POWER:2000W, 220VCONNECTIVITY:Bluetooth ControlInstructionsClick here

A redesigned perforated grain basket for the G30 Brewing System which removes the need for a top plate and additional pipework. This basket comes as a standard with the G30v3 but can be purchased as an upgrade for previous versions of the G30 Brewing System.Specifications- Up to 8 kg (18 lb) grain capacity*- Maximum batch size of 25 L (7 US Gal) of wort- 304 Stainless Steel*Grain capacity can reach 9 kg (20 lb) with a top plate (sold separately).Included:- 1 x G30 Perforated Basket- Bottom Grain Plate- Silicone Recirculation Hose

Adaptor SS304 FPT 1/2" Female to 1/2" Female (Inner Thread). SS304 stainless steel